TI DS25BR100TSD/NOPB

The DS25BR100 and DS25BR101 are single channel 3.125 Gbps LVDS buffers optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced metallic cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity.

The DS25BR100 and DS25BR101 feature transmit pre-emphasis (PE) and receive equalization (EQ), making them ideal for use as a repeater device.

Wide input common mode range allows the receiver to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires minimal space on the board while the flow-through pinout allows easy board layout. On the DS25BR100 the differential input and output is internally terminated with a 100Ω resistor to lower return losses, reduce component count and further minimize board space. For added design flexibility the 100Ω input terminations on the DS25BR101 have been eliminated. This elimination enables a designer to adjust the termination for custom interconnect topologies and layout.

• DC - 3.125 Gbps Low Jitter, High Noise Immunity, Low Power Operation
• Receive Equalization Reduces ISI Jitter Due to Media Loss
• Transmit Pre-Emphasis Drives Lossy Backplanes and Cables
• On-Chip 100Ω Input and Output Termination: Minimizes Insertion and Return Losses Reduces Component Count Minimizes Board Space
• DS25BR101 Eliminates On-Chip Input Termination for Added Design Flexibility
• 7 kV ESD on LVDS I/O Pins Protects Adjoining Components
• Small 3 mm x 3 mm WSON-8 Space Saving Package

• Clock and Data Buffering
• Metallic Cable Driving and Equalization
• FR-4 Equalization