LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
NXP S9S08SG16E1WTLR product image
Images for reference only

NXP S9S08SG16E1WTLRRoHS

Manufacturer
NXP
MPN
S9S08SG16E1WTLR
LCSC Part #
C2056637
Packaging
TSSOP-28
Customer #
Key Attributes
S08 8 Bit 40MHz 22 TSSOP-28 Microcontrollers RoHS
Datasheetpdf iconNXP S9S08SG16E1WTLR

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Embedded/Microcontrollers
ManufacturerNXP
PackagingTSSOP-28
ADC (Bit)10bit
Operating Temperature-40℃~+150℃
Voltage - Supply2.7V~5.5V
Program Memory TypeFLASH
EEPROM-
Program Storage Size16KB
CPU CoreS08
Core Size8 Bit
CPU Maximum Speed40MHz
Oscillator TypeBuilt-in
Number of I/O22
Report an ErrorShow similar products (0) >

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging2500
Sales UnitPiece

Features

AI Translation
  • 8-bit HCS08 Central Processor Unit (CPU)
    • Up to 40 MHz CPU at 5.5 V to 2.7 V across temperature range of -40 °C to 85 °C and -40 °C to 105 °C
    • HCS08 instruction set with added BGND instruction
    • Support for up to 32 interrupt/reset sources
  • On-Chip Memory
    • 32 KB or 18 KB dual array flash; read/program/erase over full operating voltage and temperature
    • 1984 byte random access memory (RAM)
    • Security circuitry to prevent unauthorized access to RAM and flash contents
  • Power-Saving Modes
    • Two low-power stop modes (stop2 and stop3)
    • Reduced-power wait mode
    • Peripheral clock gating register can disable clocks to unused modules, thereby reducing currents
    • Low power On-Chip crystal oscillator (XOSC) that can be used in low-power modes to provide accurate clock source to real time counter and LCD controller
    • 100 μs typical wakeup time from stop3 mode
  • Clock Source Options
    • Oscillator (XOSC) — Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
    • Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked-loop (FLL) controlled by internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies from 1 MHz to 20 MHz
  • System Protection
    • COP reset with option to run from dedicated 1 kHz internal clock or bus clock
    • Low-voltage warning with interrupt
    • Low-voltage detection with reset
    • Illegal opcode detection with reset
    • Illegal address detection with reset
    • Flash and RAM protection
  • Development Support
    • Single-wire background debug interface
    • Breakpoint capability to allow single breakpoint setting during in-circuit debugging and plus two more breakpoints in On-Chip debug module
  • On-Chip in-circuit emulator (ICE) debug module containing three comparators and nine trigger modes; eight deep FIFO for storing change-of-flow addresses and event-only data; debug module supports both tag and force breakpoints
  • Peripherals
    • LCD — Up to 4x41 or 8x37 LCD driver with internal charge pump
    • ADC — Up to 16-channel, 12-bit resolution, 2.5 μs conversion time, automatic compare function, temperature sensor, internal bandgap reference channel, runs in stop3 and can wake up the system, fully functional from 5.5 V to 2.7 V
    • SCI — Full duplex non-return to zero (NRZ), LIN master extended break generation, LIN slave extended break detection, wakeup on active edge
    • SPI — Full-duplex or single-wire bidirectional, double-buffered transmit and receive, master or slave mode, MSB-first or LSB-first shifting
    • IIC — With up to 100 kbps with maximum bus loading, multi-master operation, programmable slave address, interrupt driven byte-by-byte data transfer, supports broadcast mode and 10-bit addressing
    • TPMx — One 6 channel and one 2 channel, selectable input capture, output compare, or buffered edge or center-aligned PWM on each channel
    • MTIM — 8-bit counter with match register, four clock sources with prescaler dividers, can be used for periodic wakeup
    • RTC — 8-bit modulus counter with binary or decimal based prescaler, three clock sources including one external source, can be used for time base, calendar, or task scheduling functions
    • KBI — One keyboard control module capable of supporting 8x8 keyboard matrix
    • IRQ — External pin for wakeup from low-power modes
  • Input/Output
    • 39, 53, or 69 GPIOs
    • 8 KBI and 1 IRQ interrupt with selectable polarity
    • Hysteresis and configurable pullup device on all input pins, configurable slew rate and drive strength on all output pins
  • Package Options
    • 48-pin LQFP, 64-pin LQFP, and 80-pin LQFP
Out of Stock
Notify Me
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 5.0291$ 5.03
200+$ 1.947$ 389.40
500+$ 1.8788$ 939.40
1,000+$ 1.8439$ 1843.90
Standard Packaging2500/Full Reel
Better price for more quantity?
$