TI 6PAIC3104TRHBRQ1

The TLV320AIC3104-Q1 is a low-power stereo audio codec with stereo headphone amplifiers, as well as multiple inputs and outputs that are programmable in single-ended or fully differential configurations. Extensive register-based power control is included, enabling stereo 48-kHz DAC playback as low as 14 mW from a 3.3-V analog supply, making it ideal for car audio applications in cluster and head unit systems.

The record path of the TLV320AIC3104-Q1 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that can occur during noisy and unpredictable environments, such as when an e-call system is activated. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC3104-Q1 contains four high-power output drivers as well as two fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended 16-Ω headphones using AC-coupling capacitors, or stereo 16-Ω headphones in a capless output configuration. These parameters enable the TLV320AIC3104-Q1 to act as an interface between the MCU and speaker amplifiers, such as the TPA3111D1-Q1, in various audio applications in the infotainment and cluster fields.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis.

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
  • Device Temperature Grade 3: -40°C to 105°C Ambient Operating Temperature Range
  • Device HBM ESD Classification Level 2
  • Device CDM ESD Classification Level C6
• Stereo Audio DAC:
  • 102-dBA Signal-to-Noise Ratio
  • 16-, 20-, 24-, or 32-Bit Data Supports Sample Rates From 8 kHz to 96 kHz
  • 3D, Bass, Treble, EQ, De-Emphasis Effects
  • Flexible Power Saving Modes and Performance are Available
• Stereo Audio ADC:
  • 92-dBA Signal-to-Noise Ratio
  • Supports Sample Rates From 8 kHz to 96 kHz
  • Digital Signal Processing and Noise Filtering available during record
• Six Audio Input Pins:
  • One Stereo Pair of Single-Ended Inputs
  • One Stereo Pair of Fully Differential Inputs
• Six Audio Output Drivers:
  • Fully Differential or Single-Ended Stereo Headphone Drivers
  • Fully Differential Stereo Line Outputs
• Low Power: 14-mW Stereo, 48-kHz Playback With 3.3-V Analog Supply
• Ultralow-Power Mode With Passive Analog Bypass
• Programmable Input/Output Analog Gains
• Automatic Gain Control (AGC) for Record
• Programmable Microphone Bias Level
• Programmable PLL for Flexible Clock Generation
• I2C Control Bus
• Audio Serial Data Bus Supports I²S, Left/Right Justified, DSP, and TDM Modes
• Extensive Modular Power Control
• Power Supplies:
  • Analog: 2.7 V to 3.6 V
  • Digital Core: 1.525 V to 1.95 V
  • Digital I/O: 1.1 V to 3.6 V

• Cluster
• Head Unit
• Car Audio
• Emergency Call (E-Call)
• Telematics Control Unit