Infineon CYPD5126-40LQXIT

EZ-PD™ CCG5C is a one-port USB Type-C controller that complies with the latest USB Type-C and Power Delivery (PD ) specifications. CCG5C provides a complete USB Type-C and USB PD port control solution for PCs and notebooks. CCG5C includes a 32-bit, 48-MHz Arm Cortex-M0 processor with 128-KB flash and integrates a complete Type-C Transceiver including the Type-C termination resistors Rp, Rd, and dead battery Rd termination. CCG5C is available in a 40-pin QFN package.

• USB-PD
  • Supports latest USB PD 3.0 Specification
  • Fast Role Swap (FRS)
  • Extended data messaging
• Type-C
  • Integrated current sources for DFP role (Rp)
    • Default current at 500 mA/900 mA
    • 1.5 A
    • 3 A
  • Integrated Rd resistor for UFP role
  • Integrated VCONN FETs to power EMCA cables
  • Integrated dead battery termination
  • Integrated high-voltage protection on CC and SBU pins to protect against accidental shorts to the VBUS pin on the Type-C connector
• Legacy Charging
  • BCv1.2 (source and sink)
  • Apple charging (source only)
• Protection
  • Configurable hardware controlled VBUS
    • Overvoltage protection (OVP)
    • Undervoltage protection (UVP)
    • Overcurrent protection (OCP)
  • Overcurrent protection (OCP) for VCONN
  • High-voltage VBUS short protection for SBU & CC pins
• Mux
  • Integrated USB2.0 analog mux for USB 2.0 HS data and UART data
  • Integrated SBU analog mux for alternate modes (Displayport and Thunderbolt)
• LDO
  • Integrated high-voltage LDO operational up to 21.5 V for dead battery mode operation
• CSA
  • VBUS high-side Current Sense Amplifier capable of measuring current across 10-mΩ resistance
• PFET Gate Drivers
  • Gate Drivers tolerant to 24 V to drive external VBUS PFET on the consumer and provider path
  • Slew Rate Control
• 32-bit MCU Subsystem
  • 48-MHz Arm Cortex-M0 CPU
  • 128-KB Flash
  • 12-KB SRAM
• Integrated Digital Blocks
  • Two integrated timers and counters to meet response times required by the USB-PD protocol
  • Four runtime serial communication blocks (SCBs) with reconfigurable I2C, SPI, or UART functionality
• Clocks and Oscillators
  • Integrated oscillator eliminating the need for an external clock
• Operating Range
  • VSYS (2.75 V–5.5 V)
  • VBUS (4.0 V–21.5 V)
• Hot-Swappable I/Os
  • I2C pins from SCB1 and CC1, CC2 pins are hot-swappable
• Packages: 6.0 mm × 6.0 mm, 0.5 mm, 40-pin QFN
  • Supports industrial temperature range -40 ℃ to +85 ℃

• PCs and notebooks
• Thunderbolt, Non-Thunderbolt hosts and devices/docks