Infineon CYP15G0401TB-BGXC

The Quad HOTLink II Transmitter is a point-to-point or point-to-multipoint communications building block allowing the transfer of data over high-speed serial links (optical fiber, balanced, and unbalanced copper transmission lines) at signaling speeds ranging from 195 - to 1500 MBaud per serial link. Each transmitter accepts parallel characters in an Input Register, encodes each character for transport, and converts it to serial data. As a second-generation HOTLink device, it extends the HOTLink family with enhanced levels of integration and faster data rates, while maintaining serial-link compatibility (data, command, and BIST) with other HOTLink devices. The transmitters (TX) consist of four byte-wide channels. Each channel can accept either eight-bit data characters or pre-encoded 10-bit transmission characters. Data characters are passed from the Transmit Input Register to an embedded 8B/10B Encoder to improve their serial transmission characteristics. These encoded characters are then serialized and output from dual Positive ECL (PECL)-compatible differential transmission-line drivers at a bit-rate of either 10- or 20-times the input reference clock. The integrated 8B/10B Encoder may be bypassed for systems that present externally encoded or scrambled data at the parallel interface. The parallel input interface may be configured for numerous forms of clocking to provide the highest flexibility in system architecture. Each transmitter contains an independent BIST pattern generator. This BIST hardware allows at-speed testing of the high-speed serial data paths in each transmit section, and across the interconnecting links. HOTLink II devices are ideal for a variety of applications where parallel interfaces can be replaced with high-speed, point-to-point serial links. The CYP15G0401TB is a highly configurable device designed to support reliable transfer of large quantities of data, using high-speed serial links, from one source to one or multiple destinations. This device supports four single-byte or single-character channels.

• Quad transmitter for 195 to 1500 MBaud serial signaling rate — Aggregate throughput of 6 GBits/second
• Second-generation HOTLink technology
• Compliant to multiple standards — ESCON, DVB-ASI, Fibre Channel and Gigabit Ethernet (IEEE802.3z) — 8B/10B encoded or 10-bit unencoded data
• Selectable parity check
• Selectable input clocking options
• Synchronous LVTTL parallel interface
• Optional Phase Align Buffer in Transmit Path
• Internal phase-locked loop (PLL) with no external PLL components
• Dual differential PECL-compatible serial outputs per channel — Source matched for 50Ω transmission lines — No external bias resistors required — Signaling-rate controlled edge-rates
• Compatible with — fiber-optic modules — copper cables — circuit board traces
• JTAG boundary scan
• Built-In Self-Test (BIST) for at-speed link testing
• Low power 1.9W @ 3.3V typical
• Single 3.3V supply
• 256-ball thermally enhanced BGA
• Pb free package option available
• 0.25μ BiCMOS technology

• Interconnecting backplanes on switches
• Routers
• Servers
• Video transmission systems