Broadcom HFBR-1528Z
| Manufacturer | |
| MPN | HFBR-1528Z |
| LCSC Part # | C188714 |
| Packaging | Through Hole |
| Customer # | |
| Key Attributes | 10 Megabaud VersatileLink Fiber Optic Transmitter and Receiver for 1 mm P0F and 200 μm HCS |
| Datasheet |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Optoelectronics/Fiber Optic Transmitters - Discrete | |
| Manufacturer | Broadcom | |
| Packaging | Through Hole | |
| Distance | 50m;500m | |
| Signaling Rate | 10MBd | |
| Operating Temperature | -40℃~+85℃ | |
| Wavelength | 660nm |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 40 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The HFBR-0508Z Series consists of a fiber-optic transmitter and receiver operating at a 650 nm wavelength (red). The HFBR-1528Z transmitter is an LED in a low cost plastic housing designed to efficiently couple power into 200μm diameter Hard Clad Silica (HCS) and 1 mm diameter Plastic optical fiber (POF). The HFBR-2528Z receiver incorporates a PIN detector and digital output IC compatible with CMOS and TTL logic families. HFBR-0508Z links operate from DC to 10 MBd at distances up to 50 meters with 1 mm POF and up to 500 meters with 200μm HCS. No minimum link distances are required when using recommended circuits, simplifying design. Versatile Link components can be interlocked (N-plexed together) to minimize space and to provide dual connections with the duplex connectors. Up to eight packages can be interlocked and inserted into a printed circuit board. POF and HCS are available in pre-connectored lengths or can be easily field-terminated. A single transmitter drive current for POF and HCS allows both fibers to be used with a single design.
Features
- RoHS-compliant
- Data transmission at signal rates of dc to 10 MBd
- Up to 50 meters distances with 1 mm Plastic Optical Fiber (POF)
- Up to 500 meters distances with 200μm Hard Clad Silica (HCS)
- Wide dynamic range receiver allows operation from zero to maximum link distance with a single transmitter drive current
- Link distances specified for variations in temperature, power supply, and fiber attenuation
- DC coupled receiver with CMOS/TTL output for easy designs: No data encoding or digitizing circuitry required
- Pulse width distortion (PWD) controlled to limit distortion from low duty cycle or burst mode data
- High noise immunity
- Compatible with Avago’s versatile link family of connectors, for easy termination of fiber
Applications
- Industrial control and factory automation
- Serial field buses
- Intra-system links; board-to-board, rack-to-rack
- Extension of RS-232, RS-485
- Elimination of ground loops
- High voltage isolation
- Reduces voltage transient susceptibility
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 15.1055 | $ 15.11 |
| 10+ | $ 11.7351 | $ 117.35 |
| 40+ | $ 10.4845 | $ 419.38 |
| 80+ | $ 9.4351 | $ 754.81 |
Standard Packaging40/Full Tube | ||
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B4A |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B4A |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| Type | Details |
|---|---|
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |



