Infineon TLE5014PROGKITTOBO1
| Manufacturer | |
| MPN | TLE5014PROGKITTOBO1 |
| LCSC Part # | C17494375 |
| Packaging | - |
| Customer # | |
| Key Attributes | Sensor Evaluation Boards RoHS |
| Datasheet |  Infineon TLE5014PROGKITTOBO1 |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | Infineon | |
| Packaging | - | |
| Features | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
This document describes the evaluation kit for the TLE5014 GMR-based angle sensor. The manual is intended to describe the software installation process and how to use the TLE5014 angle sensor evaluation kit. The programmer consists of an Infineon XMC1100 Boot Kit and a shield board that plugs into the Boot Kit. The software package contains one file: TLE5014 - BootKit - V2.x.x.zip. A USB cable is required to connect to the PC. The shield board must be inserted into the Boot Kit; the TLE5014 can be connected to the shield board via cable, with VDD, I/O, and GND connections required. The satellite board is equipped with the TLE5014D dual-channel angle sensor; the sensor supports configuration of various protocol options and interfaces. The SENT filter must be disabled when reading/writing EEPROM. Installation requires downloading and installing the Seeger driver, connecting the programmer, and installing the programmer software. During programming, connect the programmer, select the configuration and sensor, and perform operations such as angle reading.
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | Infineon | |
| Packaging | - | |
| Features | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
This document describes the evaluation kit for the TLE5014 GMR-based angle sensor. The manual is intended to describe the software installation process and how to use the TLE5014 angle sensor evaluation kit. The programmer consists of an Infineon XMC1100 Boot Kit and a shield board that plugs into the Boot Kit. The software package contains one file: TLE5014 - BootKit - V2.x.x.zip. A USB cable is required to connect to the PC. The shield board must be inserted into the Boot Kit; the TLE5014 can be connected to the shield board via cable, with VDD, I/O, and GND connections required. The satellite board is equipped with the TLE5014D dual-channel angle sensor; the sensor supports configuration of various protocol options and interfaces. The SENT filter must be disabled when reading/writing EEPROM. Installation requires downloading and installing the Seeger driver, connecting the programmer, and installing the programmer software. During programming, connect the programmer, select the configuration and sensor, and perform operations such as angle reading.
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542391000 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542391000 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |