- Pinout
- Footprint
TI DRV8313RHHR
| Manufacturer | |
| MPN | DRV8313RHHR |
| LCSC Part # | C165154 |
| Packaging | VQFN-36-EP(6x6) |
| Customer # | |
| Key Attributes | Triple 1/2-H Bridge Driver |
| Datasheet |  TI DRV8313RHHR |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | TI | |
| Packaging | VQFN-36-EP(6x6) | |
| Drive Type | Three Phase | |
| Features | - | |
| Technology | Yes | |
| Operating temperature | -40℃~+125℃ | |
| Voltage - Supply | - | |
| Quiescent Current(Iq) | 500uA | |
| Output Current | 2.5A | |
| Peak Current | 2.5A | |
| Number of Half Bridges | 3 | |
| RDS(on) | 240mΩ | |
| Interface | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
Triple 1/2-H Bridge Driver IC – 3-Phase brushless DC Motors Solenoid and Brushed DC Motors High Current-Drive Capability: 2.5-A Peak Low MOSFET ON-Resistance Independent 1/2-H-Bridge Control Uncommitted Comparator Can Be Used for Current Limit or Other Functions Built-In 3.3-V 10-mA LDO Regulator 8-V to 60-V Operating Supply-Voltage Range • Sleep Mode for Standby Operation Small Package and Footprint – 28-Pin HTSSOP (PowerPAD Package) 36-Pin VQFN The DRV8313 provides three individually controllable half-H-bridge drivers. The device is intended to drive a three-phase brushless-DC motor, although it can also be used to drive solenoids or other loads. Each output driver channel consists of N-channel power MOSFETs configured in a 1/2-H-bridge configuration. Each 1/2-H-bridge driver has a dedicated ground terminal, which allows independent external current sensing. An uncommitted comparator is integrated into the DRV8313, which allows for the construction of current-limit circuitry or other functions. Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the nFAULT pin.
Features
- High Current-Drive Capability: 2.5-A Peak
- Low MOSFET ON-Resistance
- Independent 1/2-H-Bridge Control
- Uncommitted Comparator Can Be Used for Current Limit or Other Functions
- Built-In 3.3-V 10-mA LDO Regulator
- 8-V to 60-V Operating Supply-Voltage Range
- Sleep Mode for Standby Operation
- Small Package and Footprint – 28-Pin HTSSOP (PowerPAD Package) 36-Pin VQFN
Applications
- Camera Gimbals
- HVAC Motors
- Office Automation Machines
- Factory Automation and Robotics
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 1.8398 | $ 1.84 |
| 10+ | $ 0.9509 | $ 9.51 |
| 30+ | $ 0.8353 | $ 25.06 |
| 100+ | $ 0.705 | $ 70.50 |
| 500+ | $ 0.6464 | $ 323.20 |
| 1,000+ | $ 0.6204 | $ 620.40 |
Standard Packaging2500/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | TI | |
| Packaging | VQFN-36-EP(6x6) | |
| Drive Type | Three Phase | |
| Features | - | |
| Technology | Yes | |
| Operating temperature | -40℃~+125℃ | |
| Voltage - Supply | - | |
| Quiescent Current(Iq) | 500uA | |
| Output Current | 2.5A | |
| Peak Current | 2.5A | |
| Number of Half Bridges | 3 | |
| RDS(on) | 240mΩ | |
| Interface | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
Triple 1/2-H Bridge Driver IC – 3-Phase brushless DC Motors Solenoid and Brushed DC Motors High Current-Drive Capability: 2.5-A Peak Low MOSFET ON-Resistance Independent 1/2-H-Bridge Control Uncommitted Comparator Can Be Used for Current Limit or Other Functions Built-In 3.3-V 10-mA LDO Regulator 8-V to 60-V Operating Supply-Voltage Range • Sleep Mode for Standby Operation Small Package and Footprint – 28-Pin HTSSOP (PowerPAD Package) 36-Pin VQFN The DRV8313 provides three individually controllable half-H-bridge drivers. The device is intended to drive a three-phase brushless-DC motor, although it can also be used to drive solenoids or other loads. Each output driver channel consists of N-channel power MOSFETs configured in a 1/2-H-bridge configuration. Each 1/2-H-bridge driver has a dedicated ground terminal, which allows independent external current sensing. An uncommitted comparator is integrated into the DRV8313, which allows for the construction of current-limit circuitry or other functions. Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the nFAULT pin.
Features
- High Current-Drive Capability: 2.5-A Peak
- Low MOSFET ON-Resistance
- Independent 1/2-H-Bridge Control
- Uncommitted Comparator Can Be Used for Current Limit or Other Functions
- Built-In 3.3-V 10-mA LDO Regulator
- 8-V to 60-V Operating Supply-Voltage Range
- Sleep Mode for Standby Operation
- Small Package and Footprint – 28-Pin HTSSOP (PowerPAD Package) 36-Pin VQFN
Applications
- Camera Gimbals
- HVAC Motors
- Office Automation Machines
- Factory Automation and Robotics
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |