TI BQ25504RGTT

The bq25504 device is the first of a new family of intelligent integrated energy harvesting nano - power management solutions that are well suited for meeting the special needs of ultra low power applications. The device is specifically designed to efficiently acquire and manage the microwatts (µW) to miliwatts (mW) of power generated from a variety of DC sources like photovoltaic (solar) or thermal electric generators. The bq25504 is the first device of its kind to implement a highly efficient boost converter/charger targeted toward products and systems, such as wireless sensor networks (WSNs) which have stringent power and operational demands. The design of the bq25504 starts with a DC - DC boost converter/charger that requires only microwatts of power to begin operating. Once started, the boost converter/charger can effectively extract power from low - voltage output harvesters such as thermoelectric generators (TEGs) or single - or dual - cell solar panels. The boost converter can be started with VIN as low as 330 mV, and once started, can continue to harvest energy down to VIN = 80 mV. The bq25504 also implements a programmable maximum power point tracking sampling network to optimize the transfer of power into the device. Sampling the VIN_DC open - circuit voltage is programmed using external resistors, and held with an external capacitor (CREF). For example solar cells that operate at maximum power point (MPP) of 80% of their open - circuit voltage, the resistor divider can be set to 80% of the VIN_DC voltage and the network will control

• Ultra Low - Power With High - Efficiency DC - DC Boost Converter/Charger
• Continuous Energy Harvesting From Low - Input Sources: VIN ≥ 80 mV (Typical)
• Ultra - Low Quiescent Current: IQ < 330 nA (Typical)
• Cold - Start Voltage: VIN ≥ 330 mV (Typical)
• Programmable Dynamic Maximum Power Point Tracking (MPPT)
• Integrated Dynamic Maximum Power Point Tracking for Optimal Energy Extraction From a Variety of Energy Generation Sources
• Input Voltage Regulation Prevents Collapsing Input Source
• Energy Can be Stored to Rechargeable Li - ion Batteries, Thin - film Batteries, SuperCapacitors, or Conventional Capacitors
• User Programmable Undervoltage and Overvoltage Levels
• On - Chip Temperature Sensor With Programmable Overtemperature Shutoff
• Battery Good Output Pin
• Programmable Threshold and Hysteresis Warn Attached Microcontrollers of Pending Loss of Power
• Can be Used to Enable or Disable System Loads

• Energy Harvesting
• Solar Chargers
• Thermal Electric Generator (TEG) Harvesting
• Wireless Sensor Networks (WSNs)
• Industrial Monitoring
• Environmental Monitoring
• Bridge and Structural Health Monitoring (SHM)
• Smart Building Controls
• Portable and Wearable Health Devices
• Entertainment System Remote Controls