LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
MAXIM MAX1858EEG+ product image
Images for reference only

MAXIM MAX1858EEG+RoHS

Manufacturer
MPN
MAX1858EEG+
LCSC Part #
C1529997
Packaging
QSOP-24-150mil
Customer #
Key Attributes
10A 2 Step-down type QSOP-24-150mil DC DC Switching Controllers RoHS
Datasheetpdf iconMAXIM MAX1858EEG+

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers
ManufacturerMAXIM
PackagingQSOP-24-150mil
Operating Temperature-40℃~+85℃@(TA)
Synchronous RectifierYes
FeaturesAdjustable current limiting;Frequency synchronization;Built-in LDO regulator;Operating status indication;Overcurrent Protection
Output Current10A
Number of Channels2
TopologyBuck
Frequency - Switching600kHz
Operating Voltage4.75V~23V
FunctionStep-down type

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging50
Sales UnitPiece

Introduction

AI Translation

The MAX1858 dual, synchronized, step-down controller generates two outputs from input supplies ranging from 4.75V to 23V. Each output is adjustable from sub-1V to 18V and supports loads of 10A or higher. Input voltage ripple and total RMS input ripple current are reduced by synchronized 180° out-of-phase operation. The switching frequency is adjustable from 100kHz to 600kHz with an external resistor. Alternatively, the controller can be synchronized to an external clock generated to another MAX1858 or a system clock. One MAX1858 can be set to generate an in-phase, or 90° out-of-phase, clock signal for synchronization with additional controllers. This allows two controllers to operate either as an interleaved two- or four-phase system with each output shifted by 90°. The device also features “first-on/last-off” power sequencing for compatibility with DSPs, ASICs, and FPGAs, as well as soft-start and soft-stop to ensure reliable and repeatable power sequencing. The MAX1858 eliminates the need for current-sense resistors by utilizing the low-side MOSFET’s on-resistance as a current-sense element. This protects the DC-DC components from damage during output-overload conditions or when output short-circuit faults without requiring a current-sense resistor. Adjustable foldback current limit reduces power dissipation during short-circuit condition. A power-on reset output signals the system when both outputs reach regulation.

Features

AI Translation
  • Two Independent Output Voltages
  • 180° Out-of-Phase Operation
  • 90° Out-of-Phase Operation (Using Two MAX1858s)
  • Foldback Current Limit
  • 4.75V to 23V Input Supply Range
  • Sub-1V to 18V Output-Voltage Range (Up to 10A)
  • 90% Efficiency

  • Fixed-Frequency Pulse-Width Modulation (PWM) Operation
  • Adjustable 100kHz to 600kHz Switching Frequency
  • External SYNC Input
  • Clock Output for Master/Slave Synchronization
  • Power-On/-Off Sequencing with Soft-Start and Soft-Stop
  • RST Output with 140ms Minimum Delay
  • Lossless Current Limit (No Sense Resistor)

Applications

AI Translation
  • Network Power Supplies
  • Telecom Power Supplies
  • DSP, ASIC, and FPGA Power Supplies
  • Set-Top Boxes
  • Broadband Routers
  • Servers
Out of Stock
Stock Notification
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 5.5616$ 5.56
200+$ 2.1527$ 430.54
500+$ 2.0765$ 1038.25
1,000+$ 2.0392$ 2039.20
Standard Packaging50/Full Tube
Better price for more quantity?
$