ADI ADIS16477-2BMLZ
| Manufacturer | |
| MPN | ADIS16477-2BMLZ |
| LCSC Part # | C1526890 |
| Packaging | BGA-44 |
| Customer # | |
| Key Attributes | Precision, Miniature MEMs IMU |
| Datasheet |  ADI ADIS16477-2BMLZ |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Motion Sensors/IMUs (Inertial Measurement Units) | |
| Manufacturer | ADI | |
| Packaging | BGA-44 | |
| Accelerometer Sensing Axis | X,Y,Z | |
| Output Bits | 32bit;16bit | |
| Cache Size | - | |
| Features | Synchronization and timestamp | |
| Standby Current | - | |
| Acceleration Measurement Range (MAX) | ±40g |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The ADIS16477 is a precision, miniature MEMS inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. Each inertial sensor in the ADIS16477 combines with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, linear acceleration (gyroscope bias), and point of percussion (accelerometer location). As a result, each sensor has dynamic compensation formulas that provide accurate sensor measurements over a broad set of conditions. The ADIS16477 provides a simple, cost effective method for integrating accurate, multiaxis inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs. All necessary motion testing and calibration are part of the production process at the factory, greatly reducing system integration time. Tight orthogonal alignment simplifies inertial frame alignment in navigation systems. The serial peripheral interface (SPI) and register structure provide a simple interface for data collection and configuration control. The ADIS16477 is available in a 44 - ball, ball grid array (BGA) package that is approximately 11mm×15mm×11mm
Features
- Triaxial, digital gyroscope ±125° / sec, ±500° / sec, ±2000° / sec range models
- 2° / hr in - run bias stability (ADIS16477 - 1)
- 0.15° / √hr angle random walk (ADIS16477 - 1 and ADIS16477 - 2)
- ±0.1° axis - to - axis misalignment error
- Triaxial, digital accelerometer, ±40g
- 13μg in - run bias stability
- Triaxial, delta angle and delta velocity outputs
- Factory calibrated sensitivity, bias, and axial alignment
- Calibration temperature range: - 40℃ to +85℃
- SPI compatible data communications
- Programmable operation and control
- Automatic and manual bias correction controls
- Data ready indicator for synchronous data acquisition
- External sync modes: direct, pulse, scaled, and output
- On demand self test of inertial sensors
- On demand self test of flash memory
- Single - supply operation (VDD): 3.0V to 3.6V
- 2000g mechanical shock survivability
- Operating temperature range: - 40℃ to +105℃
Applications
- Navigation, stabilization, and instrumentation
- Unmanned and autonomous vehicles
- Smart agriculture/construction machinery
- Factory/industrial automation, robotics
- Virtual/augmented reality
- Internet of Moving Things
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 831.4622$ 640.2259 | $ 640.23 |
| 30+ | $ 807.1859$ 621.5332 | $ 18646.00 |
Standard Packaging1/Full Box | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Motion Sensors/IMUs (Inertial Measurement Units) | |
| Manufacturer | ADI | |
| Packaging | BGA-44 | |
| Accelerometer Sensing Axis | X,Y,Z | |
| Output Bits | 32bit;16bit | |
| Cache Size | - | |
| Features | Synchronization and timestamp | |
| Standby Current | - | |
| Acceleration Measurement Range (MAX) | ±40g |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The ADIS16477 is a precision, miniature MEMS inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. Each inertial sensor in the ADIS16477 combines with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, linear acceleration (gyroscope bias), and point of percussion (accelerometer location). As a result, each sensor has dynamic compensation formulas that provide accurate sensor measurements over a broad set of conditions. The ADIS16477 provides a simple, cost effective method for integrating accurate, multiaxis inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs. All necessary motion testing and calibration are part of the production process at the factory, greatly reducing system integration time. Tight orthogonal alignment simplifies inertial frame alignment in navigation systems. The serial peripheral interface (SPI) and register structure provide a simple interface for data collection and configuration control. The ADIS16477 is available in a 44 - ball, ball grid array (BGA) package that is approximately 11mm×15mm×11mm
Features
- Triaxial, digital gyroscope ±125° / sec, ±500° / sec, ±2000° / sec range models
- 2° / hr in - run bias stability (ADIS16477 - 1)
- 0.15° / √hr angle random walk (ADIS16477 - 1 and ADIS16477 - 2)
- ±0.1° axis - to - axis misalignment error
- Triaxial, digital accelerometer, ±40g
- 13μg in - run bias stability
- Triaxial, delta angle and delta velocity outputs
- Factory calibrated sensitivity, bias, and axial alignment
- Calibration temperature range: - 40℃ to +85℃
- SPI compatible data communications
- Programmable operation and control
- Automatic and manual bias correction controls
- Data ready indicator for synchronous data acquisition
- External sync modes: direct, pulse, scaled, and output
- On demand self test of inertial sensors
- On demand self test of flash memory
- Single - supply operation (VDD): 3.0V to 3.6V
- 2000g mechanical shock survivability
- Operating temperature range: - 40℃ to +105℃
Applications
- Navigation, stabilization, and instrumentation
- Unmanned and autonomous vehicles
- Smart agriculture/construction machinery
- Factory/industrial automation, robotics
- Virtual/augmented reality
- Internet of Moving Things
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 7A994 |
| CNHTS | 9029900000 |
| USHTS | 9029908080 |
| TARIC | 9029900010 |
| CAHTS | 9029900000 |
| BRHTS | 90299090 |
| INHTS | 90299000 |
| MXHTS | 9029.90.01 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 7A994 |
| CNHTS | 9029900000 |
| USHTS | 9029908080 |
| TARIC | 9029900010 |
| Type | Details |
|---|---|
| CAHTS | 9029900000 |
| BRHTS | 90299090 |
| INHTS | 90299000 |
| MXHTS | 9029.90.01 |