MICROCHIP AT17F040-30JU

The Atmel AT17F Series of In-System Programmable Configuration PROMs (Configurators) provide an easy-to-use, cost-effective configuration memory solution for FPGAs. The AT17F Series devices are packaged in the 8-pad LAP and 20-lead PLCC packages. The AT17F Series Configurators use a simple serial-access procedure to configure one or more FPGA devices. The AT17F Series Configurators can be programmed with industry-standard programmers, the Atmel ATDH2200E Programming Kit or the Atmel ATDH2225 ISP Cable.

• Programmable 4,194,304x1 and 8,388,608x1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs)
• 3.3V Output Capability
• 5.0V Tolerant I/O Pins
• Program Support using the Atmel ATDH2200E System, ATDH2225 ISP cable, or Third-party Programmers
• In-System Programmable (ISP) via 2-wire Bus
• Simple Interface to SRAM FPGAs
• Compatible with Atmel AT40K and AT94K Devices, Altera FLEX, APEX Devices, Lucent ORCA FPGAs, Xilinx XC3000, XC4000, XC5200, Spartan, Virtex FPGAs, and Motorola MPA1000 FPGAs
• Cascadable Read-back to Support Additional Configurations or Higher-density Arrays
• Low-power CMOS FLASH Process
• Available in 6mm x 6mm x 1mm 8-pad LAP (Pin-compatible with 8-lead SOIC/VOIC Packages) and 20-lead PLCC Packages
• Emulation of the Atmel AT24C Serial EEPROMs
• Low-power Standby Mode
• Single Device Capable of Holding 4-Bitstream Files Allowing Simple System Reconfiguration
• Fast Serial Download Speeds up to 33MHz
• Endurance: 100,000 Write Cycles Typical
• Green (Pb/Halide-free/RoHS Compliant) Package Options