AMD/XILINX XCR3032XL-10VQG44C

The CoolRunner XPLA3 XCR3032XL device is a 3.3V CPLD with 32 macrocells, suitable for designs that are power-sensitive and require cutting-edge programmable logic solutions. A total of two function blocks provide 750 available gates. The fastest pin-to-pin propagation delay can reach 4.5 ns, and the maximum system frequency is 213 MHz.

• Low-power 3.3V, 32-macrocell CPLD
• 4.5 ns pin-to-pin logic delay
• System frequency up to 213 MHz
• 32 macrocells, 750 usable gates
• Small form factor packages: 48-ball CS BGA (36 user I/O pins), 44-pin VQFP (36 user I/O)
• Optimized for 3.3V systems
• Ultra-low power operation
• Typical standby current of 17 μA at 25°C
• 3.3V core supply with 5V-tolerant I/O pins
• Advanced 0.35-micron five-layer metal EEPROM process
• Fast Zero-Power (FZP) CMOS technology
• 3.3V PCI electrical specification compatible outputs (no internal clamp diodes on any input or I/O, no minimum clock input capacitance)
• In-system programmable
• Input registers
• Predictable timing model
• Up to 23 available clocks per function block
• Pin-locking on design changes
• Fully compliant with IEEE Standard 1149.1 boundary scan (JTAG)
• Four global clocks
• Eight product term control terms per function block
• JTAG ISP pins with dual-function port enable pin
• Supply voltage 2.7V to 3.6V over industrial temperature range
• Per-macrocell programmable slew rate control
• Security bit to prevent unauthorized access