ADI AD7415ARTZ-1500RL7

The AD7414/AD7415 are complete temperature monitoring systems in 6- lead and 5- lead SOT- 23 packages. They contain a band gap temperature sensor and a 10- bit ADC to monitor and digitize the temperature reading to a resolution of 0.25℃. The AD7414/AD7415 provide a 2- wire serial interface that is compatible with SMBus and I²C interfaces. The parts come in four versions: the AD7414/AD7415- 0, AD7414/AD7415- 1, AD7414- 2, and AD7414- 3. The AD7414/AD7415- 0 and AD7414/AD7415- 1 versions provide a choice of three different SMBus addresses for each version. All four AD7414 versions give the possibility of eight different I²C addresses while the two AD7415 versions allow up to six I²C addresses to be used. The AD7414/AD7415's 2.7 V supply voltage, low supply current, serial interface, and small package size make them ideal for a variety of applications, including personal computers, office equipment, cellular phones, and domestic appliances. In the AD7414, on- chip registers can be programmed with high and low temperature limits, and an open- drain overtemperature indicator output (ALERT) becomes active when a programmed limit is exceeded. A configuration register allows programming of the state of the ALERT output (active high or active low). This output can be used as an interrupt or as an SMBus alert.

• 10- bit temperature- to- digital converter
• Temperature range: - 40℃ to +125℃
• Typical accuracy of +0.5℃ at +40℃
• SMBus/I²C- compatible serial interface
• 3μA power- down current
• Temperature conversion time: 29μs typ
• Space- saving 6- lead (AD7414) and 5- lead (AD7415) SOT- 23 packages
• Pin selectable addressing via AS
• Overtemperature indicator (AD7414 Only)
• SMBus alert function (AD7414 only)
• 4 versions allow 8I²C addresses (AD7414)
• 2 versions allow 6I²C addresses (AD7415)
• On- chip temperature sensor. The sensor allows an accurate measurement of the ambient temperature to be made. It is capable of ±0.5℃ temperature accuracy.
• SMBus/I²C- compatible serial interface. The interface offers pin selectable choice of three addresses per version of the AD7414/AD7415, eight address options in total for the AD7414, and six in total for the AD7415.
• Supply voltage of 2.7V to 5.5V.
• Space- saving 5- lead and 6- lead SOT- 23 packages.
• 10- bit temperature reading to 0.25℃ resolution.
• Overtemperature indicator. This indicator can be software disabled. It is used as an interrupt of SMBus alert.
• One- shot and automatic temperature conversion rates.

• Hard disk drives
• Personal computers
• Electronic test equipment
• Office equipment
• Domestic appliances
• Process control
• Cellular phones