LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

VISHAY SIC401ACD-T1-GE3

Manufacturer
MPN
SIC401ACD-T1-GE3
LCSC Part #
C143049
Packaging
MLP55-32L(5x5)
Customer #
Key Attributes
15 A microBUCK Integrated Buck Regulator with Programmable LDO
DatasheetVISHAY SIC401ACD-T1-GE3
RoHS Compliance2 documents available
Alternative Parts1
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear + Switching
ManufacturerVISHAY
PackagingMLP55-32L(5x5)
Synchronous RectifierYes
FunctionStep-down type
Frequency - Switching200kHz~1MHz
Number of Outputs1
Output TypeAdjustable
Quiescent Current300uA
Output Voltage600mV~12.75V
Operating Temperature-40℃~+85℃
Operating Voltage3V~17V
Output Current15A
TopologyBuck
FeaturesAdjustable current limiting;Cycle-by-cycle current limiting;Adjustable soft-start;Output discharge;Light load efficient mode;Built-in LDO regulator;Operating status indication;Overcurrent Protection

Introduction

AI Translation

The SiC401A/B is an advanced stand-alone synchronous buck regulator featuring integrated power MOSFETs, bootstrap switch, and a programmable LDO in a space-saving PowerPAK MLP32-55G pin package. The SiC401A/B is capable of operating with all ceramic solutions and switching frequencies up to 1 MHz. The programmable frequency, synchronous operation and selectable power-save allow operation at high efficiency across the full range of load current. The internal LDO may be used to supply 5 V for the gate drive circuits or it may be bypassed with an external 5 V for optimum efficiency and used to drive external n-channel MOSFETs or other loads. Additional features include cycle-by-cycle current limit, voltage soft-start, under voltage protection, programmable over current protection, soft shutdown and selectable power-save. The SiC401A/B also provides an enable input and a power good output.

The SiC401A/B is a step down synchronous DC/DC buck converter with integrated power MOSFETs and a 200 mA capable programmable LDO. The device is capable of 15 A operation at very high efficiency. A space saving 5 mm×5 mm 32-pin package is used. The programmable operating frequency of up to 1 MHz enables optimizing the configuration for PCB area and efficiency. The buck controller uses a pseudo-fixed frequency adaptive on-time control. This control method allows fast transient response which permits the use of smaller output capacitors.

Features

AI Translation
  • High efficiency >93 %
  • 15 A continuous output current capability
  • Integrated bootstrap switch
  • Programmable 200 mA LDO with bypass logic
  • Temperature compensated current limit
  • All ceramic solution enabled
  • Pseudo fixed-frequency adaptive on-time control
  • Programmable input UVLO threshold
  • Independent enable pin for switcher and LDO
  • Selectable ultrasonic power-save mode (SiC401A)
  • Selectable power-save mode (SiC401B)
  • Programmable soft-start and soft-shutdown
  • 1 % internal reference voltage
  • Power good output
  • Over voltage and under voltage protections

Applications

AI Translation
  • Notebook, desktop and server computers
  • Digital HDTV and digital consumer applications
  • Networking and telecommunication equipment
  • Printers, DSL, and STB applications
  • Embedded applications
  • Point of load power supplies