LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
ST STPM34TR product image
  • STPM34TR thumbnail 1
  • STPM34TR thumbnail 2
  • STPM34TR thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

ST STPM34TRRoHS

Manufacturer
MPN
STPM34TR
LCSC Part #
C129475
Packaging
QFN-32-EP(5x5)
Customer #
Key Attributes
ASSP for metering applications with four independent 24-bit 2nd order sigma-delta ADCs, 4 MHz OSF and 2 embedded PGLNA
Datasheetpdf iconST STPM34TR

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Energy Metering
ManufacturerST
PackagingQFN-32-EP(5x5)
Clock Frequency16MHz
Tolerance0.1%
Operating Temperature-40℃~+85℃
Voltage Reference Value1.18V
Voltage - Supply2.95V~3.65V
Dynamic Range5000:1
FunctionProgrammable gain;Pulse output;Built-in reference source;Built-in digital filter;Energy accumulation engine;Fault detection;Interrupt control;Digital calibration and compensation
Voltage Reference Drift30ppm/℃
Number of Channels4
InterfaceSPI;UART
Meter TypeSingle-Phase Energy Metering IC
Current - Supply4.3mA

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging3000
Sales UnitPiece

Introduction

AI Translation

The STPM3x is an ASSP family designed for high accuracy measurement of power and energies in power line systems using the Rogowski coil, current transformer or shunt current sensors. The STPM3x provides instantaneous voltage and current waveforms and calculates RMS values of voltage and currents, active, reactive and apparent power and energies. The STPM3x is a mixed signal IC family consisting of an analog and a digital section. The analog section consists of up to two programmable gain low-noise low-offset amplifiers and up to four 2nd order 24-bit sigmadelta ADCs, two bandgap voltage references with independent temperature compensation, a low drop voltage regulator and DC buffers. The digital section consists of digital filtering stage, a hardwired DSP, DFE to the input and a serial communication interface (UART or SPI). The STPM3x is fully configurable and allows a fast digital system calibration in a single point over the entire current dynamic range.

Features

AI Translation
  • Active power accuracy: -0.1% error over 5000:1 dynamic range, -0.5% error over 10000:1 dynamic range. Exceeds 50 - 60 Hz EN 50470-x, IEC 62053-2x, ANSI12.2x standard requirements for AC watt meters
  • Reactive power accuracy: -0.1% error over 2000:1 dynamic range. Dual mode apparent energy calculation
  • Instantaneous and averaged power
  • RMS and instantaneous voltage and current. Under and overvoltage detection (sag and swell) and monitoring. Overcurrent detection and monitoring
  • UART and SPI serial interface with programmable CRC polynomial verification
  • Programmable LED and interrupt outputs
  • Four independent 24-bit 2nd order sigma-delta ADCs
  • Two programmable gain chopper stabilized low-noise and low-offset amplifiers
  • Bandwidth 3.6 kHz - 3 dB
  • Vcc supply range 3.3 V ±10%
  • Supply current Icc 4.3 mA (STPM32)
  • Input clock frequency 16 MHz, Xtal or external source
  • Twin precision voltage reference: 1.18 V with independent programmable TC, 30 ppm/°C typ.
  • Internal low drop regulator
  • QFN packages
  • Operating temperature from -40 °C to +85 °C
In-Stock: 144
144 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 2.6231$ 2.62
10+$ 2.2263$ 22.26
30+$ 1.9774$ 59.32
100+$ 1.7236$ 172.36
500+$ 1.6079$ 803.95
1,000+$ 1.5581$ 1558.10
Standard Packaging3000/Full Reel
Better price for more quantity?
$