TDK InvenSense ICM-20600

The ICM- 20600 is a 6- axis MotionTracking device that combines a 3- axis gyroscope, 3- axis accelerometer, in a small 2.5mm x 3mm x 0.91mm (14- pin LGA) package. High performance specs

• Gyroscope sensitivity error: ± 1%
• Gyroscope noise: ± 4 mdps /√Hz
• Accelerometer noise: 100 μg /√Hz Includes 1 KB FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low- power mode
• EIS FSYNC support ICM- 20600 includes on- chip 16- bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V. Communication ports include I²C and high speed SPI at 10 MHz.

• 3- Axis Gyroscope with Programmable FSR of ± 250 dps, ± 500 dps, ± 1000 dps, and ± 2000 dps
• 3- Axis Accelerometer with Programmable FSR of ± 2g, ± 4g, ± 8g, and ± 16g
• User- programmable interrupts
• Wake- on- motion interrupt for low power operation of applications processor
• 1 KB FIFO buffer enables the applications processor to read the data in bursts
• On- Chip 16- bit ADCs and Programmable Filters
• Host interface: 10 MHz SPI or 400 kHz Fast Mode I²C
• Digital- output temperature sensor
• VDD operating range of 1.71 to 3.45V
• MEMS structure hermetically sealed and bonded at wafer level
• RoHS and Green compliant

• Smartphones and Tablets
• Wearable Sensors
• IoT Applications
• Motion- based game controllers
• 3D remote controls for Internet connected DTVs and set top boxes, 3D mice