- Pinout
- Footprint
ADI ADM3053BRWZ-REEL7
| Manufacturer | |
| MPN | ADM3053BRWZ-REEL7 |
| LCSC Part # | C117821 |
| Packaging | SOIC-20-300mil |
| Customer # | |
| Key Attributes | Integrated Isolated DC/DC Converter with Signal and Power Isolation CAN Transceiver |
| Datasheet |  ADI ADM3053BRWZ-REEL7 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 | |
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 25kV/us | |
| Features | CAN FD | |
| Data Rate(Max) | 1Mbps | |
| Isolation Voltage(Vrms) | 2500 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 25kV/us | |
| Features | CAN FD | |
| Data Rate(Max) | 1Mbps | |
| Isolation Voltage(Vrms) | 2500 |
Introduction
The ADM3053 is an isolated Controller Area Network (CAN) physical layer transceiver with an integrated isolated DC/DC converter, compliant with the ISO 11898 standard. The device employs iCoupler technology to integrate a dual-channel isolator, a CAN transceiver, and an isoPower DC/DC converter in a single SOIC SMT package. An on-chip oscillator generates a pair of square waves to drive an internal transformer that provides an isolated power supply. Operating from a single 5 V supply, the device delivers a fully isolated CAN solution. The ADM3053 creates a fully isolated interface between the CAN protocol controller and the physical bus layer. It supports data rates up to 1 Mbps. The device features current limiting and thermal shutdown to protect against output short circuits. Rated for the industrial temperature range, it is available in a 20-lead wide-body SOIC package.
Features
- 2.5 kV rms signal and power isolated CAN transceiver
- Integrated isoPower isolated DC/DC converter
- VCC operating voltage: 5 V
- VIO operating voltage: 5 V or 3.3 V
- Compliant with ISO 11898
- Data rate up to 1 Mbps
- Unpowered node does not disturb the bus
- Bus supports 110 or more nodes
- Slope control for reduced EMI
- Thermal shutdown protection
- High common-mode transient immunity: >25 kV/μs
- Safety and regulatory certifications (pending) UL recognized 1-minute 2,500 Vrms per UL 1577; VDE certified per DIN EN 60747-5-2 (VDE 0884 Amendment 2): 2003-01
- Industrial temperature range: −40°C to +85°C
- Wide-body 20-pin SOIC package
Applications
- CAN data bus industrial fieldbus network
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 9.1241 | $ 9.12 |
| 10+ | $ 8.1056 | $ 81.06 |
| 30+ | $ 7.4526 | $ 223.58 |
| 100+ | $ 6.8224 | $ 682.24 |
Standard Packaging400/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 | |
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 25kV/us | |
| Features | CAN FD | |
| Data Rate(Max) | 1Mbps | |
| Isolation Voltage(Vrms) | 2500 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 25kV/us | |
| Features | CAN FD | |
| Data Rate(Max) | 1Mbps | |
| Isolation Voltage(Vrms) | 2500 |
Introduction
The ADM3053 is an isolated Controller Area Network (CAN) physical layer transceiver with an integrated isolated DC/DC converter, compliant with the ISO 11898 standard. The device employs iCoupler technology to integrate a dual-channel isolator, a CAN transceiver, and an isoPower DC/DC converter in a single SOIC SMT package. An on-chip oscillator generates a pair of square waves to drive an internal transformer that provides an isolated power supply. Operating from a single 5 V supply, the device delivers a fully isolated CAN solution. The ADM3053 creates a fully isolated interface between the CAN protocol controller and the physical bus layer. It supports data rates up to 1 Mbps. The device features current limiting and thermal shutdown to protect against output short circuits. Rated for the industrial temperature range, it is available in a 20-lead wide-body SOIC package.
Features
- 2.5 kV rms signal and power isolated CAN transceiver
- Integrated isoPower isolated DC/DC converter
- VCC operating voltage: 5 V
- VIO operating voltage: 5 V or 3.3 V
- Compliant with ISO 11898
- Data rate up to 1 Mbps
- Unpowered node does not disturb the bus
- Bus supports 110 or more nodes
- Slope control for reduced EMI
- Thermal shutdown protection
- High common-mode transient immunity: >25 kV/μs
- Safety and regulatory certifications (pending) UL recognized 1-minute 2,500 Vrms per UL 1577; VDE certified per DIN EN 60747-5-2 (VDE 0884 Amendment 2): 2003-01
- Industrial temperature range: −40°C to +85°C
- Wide-body 20-pin SOIC package
Applications
- CAN data bus industrial fieldbus network
C117821 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |