LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
TI TXS0102DQMR product image
  • TXS0102DQMR thumbnail 1
  • TXS0102DQMR thumbnail 2
  • TXS0102DQMR thumbnail 3
  • Pinout
  • Footprint
Images for reference only

TI TXS0102DQMRRoHS

Manufacturer
TI
MPN
TXS0102DQMR
LCSC Part #
C108605
Packaging
X2-SON-8(1.2x1.8)
Customer #
Key Attributes
Two-bit non-inverting bidirectional voltage level converter
Datasheetpdf iconTI TXS0102DQMR
In-Stock: 5,215
5,215 In stock, ships now
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 0.4062$ 0.41
10+$ 0.3201$ 3.20
30+$ 0.2827$ 8.48
100+$ 0.2372$ 23.72
500+$ 0.2161$ 108.05
1,000+$ 0.2048$ 204.80
Standard Packaging3000/Full Reel
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Logic/Translators, Level Shifters
ManufacturerTI
PackagingX2-SON-8(1.2x1.8)
output typeOpen-drain;Push-Pull
InterfaceI2C;SMBus;UART;Single Bus
Output Signal-
Input Signal-
Operating Temperature-40℃~+85℃
Voltage - Supply2.3V~5.5V;1.65V~3.6V
Data Rate24Mbps
Number of Elements1
Channel TypeBidirectional
FeaturesAutomatic direction detection;Output enable high-impedance;Integrated pull-up resistor
Number of Circuits2
Current - Output High(IOH)-
Current - Output Low(IOL)-
Report an ErrorShow similar products (0) >

Introduction

AI Translation

This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable powersupply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

Features

AI Translation
  • No Direction-Control Signal Needed
  • Max Data Rates 24 Mbps (Push Pull) 2 Mbps (Open Drain)
  • Available in the Texas Instruments NanoStar Package
  • 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
  • VCC Isolation Feature: If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State
  • No Power-Supply Sequencing Required: Either VCCA or VCCB Can Be Ramped First
  • IOFF Supports Partial-Power-Down Mode Operation
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • A Port – 2500-V Human-Body Model (A114-B) 250-V Machine Model (A115-A) – 1500-V Charged-Device Model (C101)
    • B Port 8-kV Human-Body Model (A114-B) 250-V Machine Model (A115-A) 1500-V Charged-Device Model (C101)

Applications

AI Translation
  • I2C/SMBus
  • UART
  • GPIO