LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
ST LM358YDT product image
Immagini a scopo illustrativo

ST LM358YDTRoHS

Produttore
Cod. Prod.
LM358YDT
Cod. LCSC
C2057537
Imballo
SO-8
Numero Cliente
Attr. chiave
Low-power dual operational amplifiers
Scheda Tecnicapdf iconST LM358YDT
Disponibile: 2
2 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 0.2243$ 0.22
10+$ 0.2181$ 2.18
30+$ 0.215$ 6.45
100+$ 0.2119$ 21.19
Package Standard2500/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
ProduttoreST
ImballoSO-8
Output Current40mA
Number of Channels2
Vos - Input Offset Voltage1mV
Slew Rate700V/ms
Input Offset Current(Ios)2nA
Operating Temperature0℃~+70℃
Common Mode Rejection Ratio(CMRR)85dB
Ib - Input Bias Current20nA
Input Offset Voltage Drift(Vos TC)7uV/℃
Quiescent Current700uA
Gain Bandwidth Product1.1MHz
FeaturesBuilt-in compensation
Input Voltage Noise Density55nV/√Hz@1kHz
Dual Supply-
Rail to Rail-
Single Supply3V~30V

Descrizione

Traduzione AI

These circuits consist of two independent, high-gain, internally frequency-compensated op amps, specifically designed to operate from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage.

Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits, which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied with the standard 5 V, which is used in logic systems and will easily provide the required interface electronics with no additional power supply.

In linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage.

Caratteristiche

Traduzione AI
  • Frequency compensation implemented internally
  • Large DC voltage gain: 100 dB
  • Wide bandwidth (unity gain): 1.1 MHz (temperature compensated)
  • Very low supply current per channel essentially independent of supply voltage
  • Low input bias current: 20 nA (temperature compensated)
  • Low input offset voltage: 2 mV
  • Low input offset current: 2 nA
  • Input common-mode voltage range includes negative rails
  • Differential input voltage range equal to the power supply voltage
  • Large output voltage swing 0 V to (VCC+ - 1.5 V)

Applicazioni

Traduzione AI
  • transducer amplifiers
  • DC gain blocks
  • all the conventional op amp circuits