- Pinout
- Footprint
IC Plus IP802
| Manufacturer | IC PlusAsian Brands |
| MPN | IP802 |
| LCSC Part # | C703563 |
| Packaging | QFN-48-EP(7x7) |
| Customer # | |
| Key Attributes | 2-Port PSE Controller for PoE Systems |
| Datasheet |  IC Plus IP802 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | IC Plus | |
| Packaging | QFN-48-EP(7x7) | |
| Voltage - Supply | 45V~57V | |
| Type | - | |
| number of channels | 2 | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Power-on reset;Programmable LED indication;Built-in temperature sensor | |
| Interface | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | IC Plus | |
| Packaging | QFN-48-EP(7x7) | |
| Voltage - Supply | 45V~57V | |
| Type | - |
| Type | Description | |
|---|---|---|
| number of channels | 2 | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Power-on reset;Programmable LED indication;Built-in temperature sensor | |
| Interface | - |
Introduction
IP802 is a 2-port PSE (Power Sourcing Equipment) controller IC for PoE (Power over Ethernet) systems. It integrates power, analog and logic circuits into a single chip, and can be used for Midcap and Endpoint PSE applications. IP802 meets all IEEE 802.3AF-2003 requirements, such as multi-point resistor detection, PD classification, DC Disconnect, and Back-off for Midcap. It also meets all IEEE 802.3AT-2009 requirements, such as two-event classification and supply maximum 36W per port. IP802 comprises internal temperature monitoring and thermal protection to protect against junction overheating. The 3.3V regulator is built-in to support external devices. Multiple IP802s can integrate to build a 2×N ports PSE system, and I²C bus uses to collect PD power status from each IP802 to support global power managements. Multiple IP802s can build a cost effective PHY level PSE system to support PD classification and power management without a host. With a management host, a networked LLDP (Link Layer Discovery Protocol) based multiple IP802s PSE system can be built. Based on LLDP (part of IEEE Std 802.3AT-2009), dynamic power management between PSE and PD can be maintained in real time for power efficiency. Management switch host has options to communicate IP802s via I²C bus for PSE management activities. Opt couplers can be implemented to provide electrical isolations between the host and IP802s for signal communication.
Features
- IEEE 802.3AF-2003 and 802.3AT-2009 compliant
- Single DC power supply voltage input (45~57V)
- Wide temperature range: -40℃~+85℃
- Supplies 2 independent power ports
- Built-in power FETs
- Continuous system monitoring for every port
- Independent system parameters setting for every port
- Thermal monitoring and protection
- Built-in 3.3V regulators for external devices
- Built-in Power on Reset
- Configurations: (1) 30W×2 ports
- Built-in LEDs control
- Built-in EEPROM interface for dumb application
- Package and operation temperature 48 Pin(7mmx7mm) MQFN, -40~85℃
Applications
- 2 port PSE
- Midcap and Endpoint PSE applications
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 2.5907 | $ 2.59 |
| 10+ | $ 2.2182 | $ 22.18 |
| 30+ | $ 1.9857 | $ 59.57 |
| 260+ | $ 1.7471 | $ 454.25 |
| 520+ | $ 1.6394 | $ 852.49 |
| 1,040+ | $ 1.5932 | $ 1656.93 |
Standard Packaging260/Full Tray | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | IC Plus | |
| Packaging | QFN-48-EP(7x7) | |
| Voltage - Supply | 45V~57V | |
| Type | - | |
| number of channels | 2 | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Power-on reset;Programmable LED indication;Built-in temperature sensor | |
| Interface | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | IC Plus | |
| Packaging | QFN-48-EP(7x7) | |
| Voltage - Supply | 45V~57V | |
| Type | - |
| Type | Description | |
|---|---|---|
| number of channels | 2 | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Power-on reset;Programmable LED indication;Built-in temperature sensor | |
| Interface | - |
Introduction
IP802 is a 2-port PSE (Power Sourcing Equipment) controller IC for PoE (Power over Ethernet) systems. It integrates power, analog and logic circuits into a single chip, and can be used for Midcap and Endpoint PSE applications. IP802 meets all IEEE 802.3AF-2003 requirements, such as multi-point resistor detection, PD classification, DC Disconnect, and Back-off for Midcap. It also meets all IEEE 802.3AT-2009 requirements, such as two-event classification and supply maximum 36W per port. IP802 comprises internal temperature monitoring and thermal protection to protect against junction overheating. The 3.3V regulator is built-in to support external devices. Multiple IP802s can integrate to build a 2×N ports PSE system, and I²C bus uses to collect PD power status from each IP802 to support global power managements. Multiple IP802s can build a cost effective PHY level PSE system to support PD classification and power management without a host. With a management host, a networked LLDP (Link Layer Discovery Protocol) based multiple IP802s PSE system can be built. Based on LLDP (part of IEEE Std 802.3AT-2009), dynamic power management between PSE and PD can be maintained in real time for power efficiency. Management switch host has options to communicate IP802s via I²C bus for PSE management activities. Opt couplers can be implemented to provide electrical isolations between the host and IP802s for signal communication.
Features
- IEEE 802.3AF-2003 and 802.3AT-2009 compliant
- Single DC power supply voltage input (45~57V)
- Wide temperature range: -40℃~+85℃
- Supplies 2 independent power ports
- Built-in power FETs
- Continuous system monitoring for every port
- Independent system parameters setting for every port
- Thermal monitoring and protection
- Built-in 3.3V regulators for external devices
- Built-in Power on Reset
- Configurations: (1) 30W×2 ports
- Built-in LEDs control
- Built-in EEPROM interface for dumb application
- Package and operation temperature 48 Pin(7mmx7mm) MQFN, -40~85℃
Applications
- 2 port PSE
- Midcap and Endpoint PSE applications
C703563 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |