LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
TI TPA3130D2DAPR product image
  • TPA3130D2DAPR thumbnail 1
  • TPA3130D2DAPR thumbnail 2
  • TPA3130D2DAPR thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

TI TPA3130D2DAPRRoHS

Manufacturer
MPN
TPA3130D2DAPR
LCSC Part #
C95206
Packaging
HTSSOP-32-EP-6.1mm
Customer #
Key Attributes
Filter-Free Class-D Stereo Amplifier Family With AM Avoidance Features
Datasheetpdf iconTI TPA3130D2DAPR

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers
ManufacturerTI
PackagingHTSSOP-32-EP-6.1mm
Quiescent Current35mA
Total Harmonic Distortion + Noise (THD+N)0.1%
Number of Inputs-
Signal-to-Noise Ratio102dB
FeaturesFilterless architecture;Integrated PLL;Overvoltage protection;ESD protection;Enable/shutdown function
Voltage - Supply4.5V~26V
Speaker Channels2-Channel
Efficiency90%
Operating Temperature-40℃~+85℃
Output Power15Wx2@8Ω
ClassClass D
Power Supply Rejection Ratio (PSRR)-70dB

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging2000
Sales UnitPiece

Introduction

AI Translation

The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2×15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ω with a small heatsink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels. The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices. The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

Features

AI Translation
  • Supports Multiple Output Configurations – 2×50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2), 2×30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2), 2×15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2)
  • Wide Voltage Range: 4.5 V to 26 V
  • Efficient Class-D Operation – >90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat Sink Size
  • Advanced Modulation Schemes
  • Multiple Switching Frequencies – AM Avoidance
  • Master and Slave Synchronization – Up to 1.2-MHz Switching Frequency
  • Feedback Power-Stage Architecture With High PSRR Reduces PSU Requirements
  • Programmable Power Limit
  • Differential and Single-Ended Inputs
  • Stereo and Mono Mode With Single-Filter Mono Configuration
  • Single Power Supply Reduces Component Count
  • Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, DCDetect, and Short Circuit With Error Reporting
  • Thermally Enhanced Packages – DAD (32-Pin HTSSOP Pad Up) – DAP (32-Pin HTSSOP Pad Down)
  • -40°C to 85°C Ambient Temperature Range

Applications

AI Translation
  • Mini-Micro Component
  • Speaker Bar
  • Docks
  • After-Market Automotive
  • CRT TV
  • Consumer Audio Applications
In-Stock: 752
752 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 1.0394$ 1.04
10+$ 0.8643$ 8.64
30+$ 0.7768$ 23.30
100+$ 0.6908$ 69.08
500+$ 0.6389$ 319.45
1,000+$ 0.6114$ 611.40
Standard Packaging2000/Full Reel
Better price for more quantity?
$