ADI LTC2412IGN#TRPBF

A 2-channel differential input micropower 24-bit No Latency ΔΣ analog-to-digital converter with an integrated oscillator. It provides 2ppm INL and 0.16ppm RMS noise over the entire supply range. The two differential channels are converted alternately with channel ID included in the conversion results. It uses delta-sigma technology and provides single conversion settling of the digital filter. Through a single pin, it can be configured for better than 110dB input differential mode rejection at 50Hz or 60Hz ±2%, or it can be driven by an external oscillator for a user defined rejection frequency. The internal oscillator requires no external frequency setting components. The converter accepts any external differential reference voltage from 0.1V to VCC for flexible ratiometric and remote sensing measurement configurations. The full-scale differential input range is from -0.5VREF to 0.5VREF. The reference common mode voltage, VREFCM, and the input common mode voltage, VINCM, may be independently set anywhere within the GND to VCC. The DC common mode input rejection is better than 140dB. It communicates through a flexible 3-wire digital interface which is compatible with SPI and MICROWIRE protocols.

• 2-Channel Differential Input with Automatic Channel Selection (Ping-Pong)
• Low Supply Current: 200μA, 4μA in Autosleep
• Differential Input and Differential Reference with GND to VCC Common Mode Range
• 2ppm INL, No Missing Codes
• 2.5ppm Full-Scale Error and 0.1ppm Offset
• 0.16ppm Noise, 22.5 Effective Number of Bits
• No Latency: Digital Filter Settles in a Single Cycle and Each Channel Conversion is Accurate
• Internal Oscillator—No External Components Required
• 110dB Min, 50Hz or 60Hz Notch Filter
• Narrow SSOP-16 Package
• Single Supply 2.7V to 5.5V Operation

• Direct Sensor Digitizer
• Weight Scales
• Direct Temperature Measurement
• Gas Analyzers
• Strain-Gage Transducers
• Instrumentation
• Data Acquisition
• Industrial Process Control
• 6-Digit DVMs