LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
Broadcom HCPL-4504-300E product image
  • HCPL-4504-300E thumbnail 1
  • HCPL-4504-300E thumbnail 2
  • HCPL-4504-300E thumbnail 3
  • Pinout
  • Footprint
Images for reference only

Broadcom HCPL-4504-300ERoHS

Manufacturer
Broadcom
MPN
HCPL-4504-300E
LCSC Part #
C6795886
Packaging
SMD-8
Customer #
Key Attributes
High CMR, High Speed Optocouplers
Datasheetpdf iconBroadcom HCPL-4504-300E
In-Stock: 1
1 In stock, ships now
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 4.0169$ 4.02
10+$ 3.4652$ 34.65
30+$ 3.1379$ 94.14
100+$ 2.806$ 280.60
500+$ 2.6523$ 1326.15
1,000+$ 2.5832$ 2583.20
Standard Packaging1000/Full Reel
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIsolators/Optocouplers, Optoisolators/Transistor, Photovoltaic Output Optoisolators
ManufacturerBroadcom
PackagingSMD-8
Output Current8mA
Data Rate-
Low Level Delay Time500ns
High Level Delay Time300ns
Load Voltage-
Reverse Voltage5V
Current transfer ratio25%
Voltage - Forward(Vf)1.7V
Voltage - Supply200mV~5.5V
Forward Current(If)25mA
CMTI(kV/us)30kV/us
Number of Channels1
Pd - Power Dissipation-
Input threshold current16mA
Input typeDC
Isolation Voltage(Vrms)3.75kV
FeaturesOpen-collector output
Report an ErrorShow similar products (0) >

Introduction

AI Translation

The HCPL-4504 and HCPL-0454 contain a GaAsP LED while the HCPL-J454 and HCNW4504 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector. The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH - tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems. The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application. These single channel, diode-transistor optocouplers are available in 8-Pin DIP, SO-8, and Widebody package configurations. An insulating layer between a LED and an integrated photodetector provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base collector capacitance.

Features

AI Translation
  • Short propagation delays for TTL and IPM applications
  • 15 kV/μs minimum Common Mode Transient immunity at VCM = 1500 V for TTL/load drive
  • High CTR at TA = 25 ℃ >25% for HCPL-4504/0454 >23% for HCNW4504 >19% for HCPL-J454
  • Electrical specifications for common IPM applications
  • TTL compatible
  • Open collector output
  • Safety approval: UL recognized – 3750 V rms/1min. for HCPL-4504/0454/J454 – 5000 V rms/1min. for HCPL-4504 Option 020 and HCNW4504 CSA approved IEC/EN/DIN EN 60747-5-2 approved – VIORM = 560 Vpeak for HCPL-0454 Option 060 – VIORM = 630 Vpeak for HCPL-4504 Option 060 – VIORM = 891 Vpeak for HCPL-J454 – VIORM = 1414 Vpeak for HCNW4504

Applications

AI Translation
  • Inverter circuits and Intelligent Power Module (IPM) interfacing: High Common Mode Transient immunity (greater than 10 kV/μs for an IPM load/drive) and (tPLH - tPHL) Specified (see Power Inverter Dead Time section)
  • Line receivers: Short propagation delays and low input-output capacitance
  • High speed logic ground isolation: TTL/TTL, TTL/ CMOS, TTL/LSTTL
  • Replaces pulse transformers: Save board space and weight
  • Analog signal ground isolation: Integrated photodetector provides improved linearity over phototransistors