ADI ADSC573WCBCZ500

The ADRF5730 is a silicon, 6-bit digital attenuator with 31.5 dB attenuation control range in 0.5 dB steps. This device operates from 100 MHz to 40 GHz with better than 4.8 dB of insertion loss and excellent attenuation accuracy. The ADRF5730 has a radio frequency (RF) input power handling capability of 27 dBm average and 30 dBm peak for all states. The ADRF5730 requires a dual supply voltage of +3.3 V and -3.3 V. The device features serial peripheral interface (SPI), parallel mode control, and complementary metal-oxide semiconductor (CMOS)-/low voltage transistor to transistor logic (LVTTL)- compatible controls. The ADRF5730 is pin-compatible with the ADRF5720 low frequency cutoff version, which operates from 9 kHz to 40 GHz. The ADRF5730 RF ports are designed to match a characteristic impedance of 50 Ω. For wideband applications, impedance matching on the RF transmission lines can further optimize high frequency insertion loss, return loss, and attenuation accuracy characteristics. The ADRF5730 comes in a 24-terminal, 4 mm×4 mm, RoHS-compliant, land grid array (LGA) package and operates from -40℃ to +105℃.

• Ultrawideband frequency range: 100 MHz to 40 GHz
• Attenuation range: 0.5 dB steps to 31.5 dB
• Low insertion loss with impedance match 2.1 dB up to 18 GHz 2.9 dB up to 26 GHz 4.8 dB up to 40 GHz
• Attenuation accuracy with impedance match ±(0.10+1.0% of attenuation state) up to 18 GHz ±(0.15+0.8% of attenuation state) up to 26 GHz ±(0.35+2.5% of attenuation state) up to 40 GHz
• Typical step error with impedance match ±0.78 dB up to 18 GHz ±0.23 dB up to 26 GHz ±0.57 dB up to 40 GHz
• High input linearity P0.1dB insertion loss state: 30 dBm P0.1dB other attenuation states: 27 dBm IP3: 50 dBm typical
• High RF input power handling: 27 dBm average, 30 dBm peak
• Tight distribution in relative phase
• No low frequency spurious signals
• SPI and parallel mode control, CMOS/LVTTL compatible
• RF settling time (0.1 dB of final RF output): 250 ns
• 24-terminal, 4 mm×4 mm LGA package
• Pin compatible with ADRF5720, low frequency cutoff version

• Industrial scanners
• Test and instrumentation
• Cellular infrastructure: 5G millimeter wave
• Microwave radios and very small aperture terminals (VSATs)