- Pinout
- Footprint
ADI ADM3057EBRWZ
| Manufacturer | |
| MPN | ADM3057EBRWZ |
| LCSC Part # | C658108 |
| Packaging | SOIC-20-300mil |
| Customer # | |
| Key Attributes | 5 kV rms/3 kV rms, Signal and Power Isolated, CAN Transceivers for CAN FD |
| Datasheet |  ADI ADM3057EBRWZ |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 | |
| Operating Temperature | -40℃~+105℃ | |
| CMTI(kV/us) | 75kV/us | |
| Features | CAN FD;Low-power mode;Wake-up function;Bus fault detection and protection | |
| Data Rate(Max) | 12Mbps | |
| Isolation Voltage(Vrms) | 3000 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+105℃ | |
| CMTI(kV/us) | 75kV/us | |
| Features | CAN FD;Low-power mode;Wake-up function;Bus fault detection and protection | |
| Data Rate(Max) | 12Mbps | |
| Isolation Voltage(Vrms) | 3000 |
Introduction
The ADM3055E/ADM3057E are 5 kV rms and 3 kV rms isolated controller area network (CAN) physical layer transceivers with integrated isolated dc-to-dc converters. The ADM3055E/ ADM3057E meet flexible data rate (CAN FD) requirements for operation to 5 Mbps and higher and comply with the ISO 11898-2: 2016 standard. The ADM3055E/ADM3057E are capable of supporting data rates as high as 12 Mbps. The devices combine a 3-channel isolator, a CAN transceiver, and an isoPower dc-to-dc converter into a single, surface-mount, small outline integrated circuit (SOIC) package. The devices are powered by a single 5 V supply, realizing a fully isolated solution for CAN and CAN FD. Radiated emissions from the high frequency switching of the dc-to-dc convertors are kept below EN 55022 Class B limits by continuous adjustments to the switching frequency. The ADM3055E/ADM3057E provide complete isolation between the CAN controller and physical layer bus. Safety and regulatory approvals (pending) for 5 kV rms isolation voltage, 10 kV surge test, and 8.3 mm creepage and clearance ensure the ADM3055E meets application reinforced isolation requirements. The ADM3057E has an isolation voltage of 3 kV rms and 7.8 mm creepage in a 20-lead, wide body SOIC. Low propagation delays through the isolation support longer bus cables. Slope control mode is available for standard CAN at low data rates. Standby mode minimizes power consumption when the bus is idle or if the node goes offline. Silent mode allows the TXD input to be ignored for listen only mode. Dominant timeout functionality protects against bus lock up in a fault condition. The current limiting and thermal shutdown features protect against output short circuits. The devices are fully specified over an industrial temperature range of -40°C to +105°C.
Features
- VIORM = 849 VPEAK
Applications
- CANOpen, DeviceNet, and other CAN bus implementations
- Industrial automation
- Process control and building control
- Transport and infrastructure
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 14.4685 | $ 14.47 |
| 10+ | $ 13.8505 | $ 138.51 |
| 30+ | $ 12.7771 | $ 383.31 |
| 100+ | $ 11.8402 | $ 1184.02 |
Standard Packaging37/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 | |
| Operating Temperature | -40℃~+105℃ | |
| CMTI(kV/us) | 75kV/us | |
| Features | CAN FD;Low-power mode;Wake-up function;Bus fault detection and protection | |
| Data Rate(Max) | 12Mbps | |
| Isolation Voltage(Vrms) | 3000 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | SOIC-20-300mil | |
| Voltage - Supply | 4.5V~5.5V | |
| number of channels | 1 |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+105℃ | |
| CMTI(kV/us) | 75kV/us | |
| Features | CAN FD;Low-power mode;Wake-up function;Bus fault detection and protection | |
| Data Rate(Max) | 12Mbps | |
| Isolation Voltage(Vrms) | 3000 |
Introduction
The ADM3055E/ADM3057E are 5 kV rms and 3 kV rms isolated controller area network (CAN) physical layer transceivers with integrated isolated dc-to-dc converters. The ADM3055E/ ADM3057E meet flexible data rate (CAN FD) requirements for operation to 5 Mbps and higher and comply with the ISO 11898-2: 2016 standard. The ADM3055E/ADM3057E are capable of supporting data rates as high as 12 Mbps. The devices combine a 3-channel isolator, a CAN transceiver, and an isoPower dc-to-dc converter into a single, surface-mount, small outline integrated circuit (SOIC) package. The devices are powered by a single 5 V supply, realizing a fully isolated solution for CAN and CAN FD. Radiated emissions from the high frequency switching of the dc-to-dc convertors are kept below EN 55022 Class B limits by continuous adjustments to the switching frequency. The ADM3055E/ADM3057E provide complete isolation between the CAN controller and physical layer bus. Safety and regulatory approvals (pending) for 5 kV rms isolation voltage, 10 kV surge test, and 8.3 mm creepage and clearance ensure the ADM3055E meets application reinforced isolation requirements. The ADM3057E has an isolation voltage of 3 kV rms and 7.8 mm creepage in a 20-lead, wide body SOIC. Low propagation delays through the isolation support longer bus cables. Slope control mode is available for standard CAN at low data rates. Standby mode minimizes power consumption when the bus is idle or if the node goes offline. Silent mode allows the TXD input to be ignored for listen only mode. Dominant timeout functionality protects against bus lock up in a fault condition. The current limiting and thermal shutdown features protect against output short circuits. The devices are fully specified over an industrial temperature range of -40°C to +105°C.
Features
- VIORM = 849 VPEAK
Applications
- CANOpen, DeviceNet, and other CAN bus implementations
- Industrial automation
- Process control and building control
- Transport and infrastructure
C658108 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |