Hangzhou Ruimeng Tech MS35776
| Manufacturer | Hangzhou Ruimeng TechAsian Brands |
| MPN | MS35776 |
| LCSC Part # | C5371384 |
| Packaging | QFN-28-EP(5x5) |
| Customer # | |
| Key Attributes | Low-noise 256-microstep microstepping motor driver |
| Datasheet |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | Hangzhou Ruimeng Tech | |
| Packaging | QFN-28-EP(5x5) | |
| Number of H-bridges | - | |
| Drive Type | Bipolar Driver | |
| Features | Motor step-out prevention function;Built-in charge pump;Overcurrent Protection;Over temperature protection;Thermal warning;Under-voltage lockout | |
| Technology | Yes | |
| Interface | STEP/DIR | |
| Operating Temperature | -40℃~+125℃ | |
| Output Current | 2A | |
| Step Resolution | 2;4;8;16;32;64;128;256 | |
| Control Voltage | 3.3V~5.25V | |
| RDS(on) | 570mΩ | |
| Motor Drive Voltage(Vm) | 5.5V~36V |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | Hangzhou Ruimeng Tech | |
| Packaging | QFN-28-EP(5x5) | |
| Number of H-bridges | - | |
| Drive Type | Bipolar Driver | |
| Features | Motor step-out prevention function;Built-in charge pump;Overcurrent Protection;Over temperature protection;Thermal warning;Under-voltage lockout | |
| Technology | Yes |
| Type | Description | |
|---|---|---|
| Interface | STEP/DIR | |
| Operating Temperature | -40℃~+125℃ | |
| Output Current | 2A | |
| Step Resolution | 2;4;8;16;32;64;128;256 | |
| Control Voltage | 3.3V~5.25V | |
| RDS(on) | 570mΩ | |
| Motor Drive Voltage(Vm) | 5.5V~36V |
Introduction
This is a high-precision, low-noise two-phase stepper motor driver IC, integrating both fast and silent operating modes to accommodate varying speed requirements. It features integrated power MOSFETs, supporting a continuous average current of 1.4A and a peak current of 2A. The IC incorporates comprehensive protection features, including undervoltage protection, overcurrent protection, short-to-ground protection, short-to-supply protection, and overtemperature protection.
Features
- Drives two-phase stepper motors, peak current up to 2A
- Low on-resistance
- Operating voltage range 4.7V~36V
- STEP/DIR interface with 2, 4, 8, or 16 microstep selection
- Integrated 256 microstep interpolation
- Automatic power-saving mode when motor is idle
- Built-in optional sense resistor mode, no external sense resistor required
- QFN28 package with exposed thermal pad
- AEC-Q100 compliant automotive-grade product available (MS35776A)
Applications
- Precision industrial equipment
- Medical devices
- 3D printing
- Surveillance equipment
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 1.9578 | $ 1.96 |
| 10+ | $ 1.6643 | $ 16.64 |
| 30+ | $ 1.481 | $ 44.43 |
| 100+ | $ 1.2928 | $ 129.28 |
| 500+ | $ 1.2085 | $ 604.25 |
| 1,000+ | $ 1.1712 | $ 1171.20 |
Standard Packaging4000/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | Hangzhou Ruimeng Tech | |
| Packaging | QFN-28-EP(5x5) | |
| Number of H-bridges | - | |
| Drive Type | Bipolar Driver | |
| Features | Motor step-out prevention function;Built-in charge pump;Overcurrent Protection;Over temperature protection;Thermal warning;Under-voltage lockout | |
| Technology | Yes | |
| Interface | STEP/DIR | |
| Operating Temperature | -40℃~+125℃ | |
| Output Current | 2A | |
| Step Resolution | 2;4;8;16;32;64;128;256 | |
| Control Voltage | 3.3V~5.25V | |
| RDS(on) | 570mΩ | |
| Motor Drive Voltage(Vm) | 5.5V~36V |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | Hangzhou Ruimeng Tech | |
| Packaging | QFN-28-EP(5x5) | |
| Number of H-bridges | - | |
| Drive Type | Bipolar Driver | |
| Features | Motor step-out prevention function;Built-in charge pump;Overcurrent Protection;Over temperature protection;Thermal warning;Under-voltage lockout | |
| Technology | Yes |
| Type | Description | |
|---|---|---|
| Interface | STEP/DIR | |
| Operating Temperature | -40℃~+125℃ | |
| Output Current | 2A | |
| Step Resolution | 2;4;8;16;32;64;128;256 | |
| Control Voltage | 3.3V~5.25V | |
| RDS(on) | 570mΩ | |
| Motor Drive Voltage(Vm) | 5.5V~36V |
Introduction
This is a high-precision, low-noise two-phase stepper motor driver IC, integrating both fast and silent operating modes to accommodate varying speed requirements. It features integrated power MOSFETs, supporting a continuous average current of 1.4A and a peak current of 2A. The IC incorporates comprehensive protection features, including undervoltage protection, overcurrent protection, short-to-ground protection, short-to-supply protection, and overtemperature protection.
Features
- Drives two-phase stepper motors, peak current up to 2A
- Low on-resistance
- Operating voltage range 4.7V~36V
- STEP/DIR interface with 2, 4, 8, or 16 microstep selection
- Integrated 256 microstep interpolation
- Automatic power-saving mode when motor is idle
- Built-in optional sense resistor mode, no external sense resistor required
- QFN28 package with exposed thermal pad
- AEC-Q100 compliant automotive-grade product available (MS35776A)
Applications
- Precision industrial equipment
- Medical devices
- 3D printing
- Surveillance equipment
C5371384 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |



