VISHAY TSOP95538TR
| Manufacturer | |
| MPN | TSOP95538TR |
| LCSC Part # | C3742828 |
| Packaging | - |
| Customer # | |
| Key Attributes | 38kHz 24m 370uA 2V~3.6V Photo Detectors - Remote Receiver RoHS |
| Datasheet |  VISHAY TSOP95538TR |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Optical Sensors/Photo Detectors - Remote Receiver | |
| Manufacturer | VISHAY | |
| Packaging | - | |
| Frequency - Center | 38kHz | |
| Transmission Distance | 24m | |
| Operating Temperature | -25℃~+85℃ | |
| Current - Supply | 370uA | |
| Voltage - Supply | 2V~3.6V |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Optical Sensors/Photo Detectors - Remote Receiver | |
| Manufacturer | VISHAY | |
| Packaging | - | |
| Frequency - Center | 38kHz |
| Type | Description | |
|---|---|---|
| Transmission Distance | 24m | |
| Operating Temperature | -25℃~+85℃ | |
| Current - Supply | 370uA | |
| Voltage - Supply | 2V~3.6V |
Introduction
The TSOP95... series devices are the latest generation of miniaturized IR receiver modules for infrared remote control systems. These series offer improved sensitivity to remote control signals in dark environments, as well as improved sensitivity in the presence of optical interference (e.g., from compact fluorescent lamps). The devices contain a PIN diode and a preamplifier assembled on a lead frame. An infrared filter is incorporated in the epoxy package. The demodulated output signal can be directly connected to a microprocessor for decoding. The TSOP953.. and TSOP955.. series devices are designed to receive short pulse codes (minimum 6 carrier cycles per burst). The third digit indicates the AGC level (AGC3 or AGC5), and the last two digits indicate the bandpass frequency (see table below). Higher AGC provides better noise suppression but lower code compatibility. AGC3 provides enhanced noise suppression, and AGC5 provides maximum noise suppression. In general, it is recommended to select the highest AGC that satisfactorily receives the required remote control codes. These components are not qualified to automotive specifications.
Features
- Enhanced sensitivity in dark environments
- Improved immunity to optical noise
- Ultra-low supply current
- Photodetector and preamplifier integrated in a single package
- Built-in PCM frequency filter
- Supply voltage: 2.0 V to 3.6 V
- Insensitive to supply voltage ripple and noise
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 0.8454 | $ 0.85 |
| 200+ | $ 0.3271 | $ 65.42 |
| 500+ | $ 0.3163 | $ 158.15 |
| 1,000+ | $ 0.3101 | $ 310.10 |
Standard Packaging2300/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Optical Sensors/Photo Detectors - Remote Receiver | |
| Manufacturer | VISHAY | |
| Packaging | - | |
| Frequency - Center | 38kHz | |
| Transmission Distance | 24m | |
| Operating Temperature | -25℃~+85℃ | |
| Current - Supply | 370uA | |
| Voltage - Supply | 2V~3.6V |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Optical Sensors/Photo Detectors - Remote Receiver | |
| Manufacturer | VISHAY | |
| Packaging | - | |
| Frequency - Center | 38kHz |
| Type | Description | |
|---|---|---|
| Transmission Distance | 24m | |
| Operating Temperature | -25℃~+85℃ | |
| Current - Supply | 370uA | |
| Voltage - Supply | 2V~3.6V |
Introduction
The TSOP95... series devices are the latest generation of miniaturized IR receiver modules for infrared remote control systems. These series offer improved sensitivity to remote control signals in dark environments, as well as improved sensitivity in the presence of optical interference (e.g., from compact fluorescent lamps). The devices contain a PIN diode and a preamplifier assembled on a lead frame. An infrared filter is incorporated in the epoxy package. The demodulated output signal can be directly connected to a microprocessor for decoding. The TSOP953.. and TSOP955.. series devices are designed to receive short pulse codes (minimum 6 carrier cycles per burst). The third digit indicates the AGC level (AGC3 or AGC5), and the last two digits indicate the bandpass frequency (see table below). Higher AGC provides better noise suppression but lower code compatibility. AGC3 provides enhanced noise suppression, and AGC5 provides maximum noise suppression. In general, it is recommended to select the highest AGC that satisfactorily receives the required remote control codes. These components are not qualified to automotive specifications.
Features
- Enhanced sensitivity in dark environments
- Improved immunity to optical noise
- Ultra-low supply current
- Photodetector and preamplifier integrated in a single package
- Built-in PCM frequency filter
- Supply voltage: 2.0 V to 3.6 V
- Insensitive to supply voltage ripple and noise
C3742828 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| Type | Details |
|---|---|
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |