- Pinout
- Footprint
QST QMI8658A
| Manufacturer | QSTAsian Brands |
| MPN | QMI8658A |
| LCSC Part # | C3021082 |
| Packaging | LGA-14 |
| Customer # | |
| Key Attributes | Low Noise, Wide Bandwidth 6D Inertial Measurement Unit with Motion Co-Processor |
| Datasheet |  QST QMI8658A |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Motion Sensors/Accelerometers | |
| Manufacturer | QST | |
| Packaging | LGA-14 | |
| Accelerometer Sensing Axis | X,Y,Z | |
| Output Bits | 16bit | |
| Cache Size | 1.5KB | |
| Features | Synchronization and timestamp;Motion event detection | |
| Standby Current | - | |
| Acceleration Measurement Range (MAX) | ±16g |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Motion Sensors/Accelerometers | |
| Manufacturer | QST | |
| Packaging | LGA-14 | |
| Accelerometer Sensing Axis | X,Y,Z | |
| Output Bits | 16bit |
| Type | Description | |
|---|---|---|
| Cache Size | 1.5KB | |
| Features | Synchronization and timestamp;Motion event detection | |
| Standby Current | - | |
| Acceleration Measurement Range (MAX) | ±16g |
Introduction
The QMI8658A is a complete 6D MEMS inertial measurement unit (IMU). With tight board-level gyroscope sensitivity of ±3%, gyroscope noise density of 13 mdps/ Hz, and low latency, the QMI8658A is ideal for consumer and industrial applications. The QMI8658A incorporates a 3-axis gyroscope and a 3-axis accelerometer. It provides a host-processor interface supporting I3C, I²C and 3-wire or 4-wire SPI. With its built-in digital functionality, low power, and small size, the QMI8658A is the ideal part for applications requiring motion-based functionality.
Features
- Low 13 mdps/ Hz gyroscope noise, low-latency, and wide bandwidth
- Low Noise 150μg/√Hz accelerometer noise
- Host (slave) interface supports MIP1TM I3C, I²C, and 3-wire or 4-wire SPI
- Accelerometer and gyroscope sensors feature signal processing paths with digitally programmable data rates and filtering
- 3-axis gyroscope and 3-axis accelerometer in a small 2.5×3.0×0.86mm 14-pin LGA package
- Large 1536-byte FIFO can be used to buffer sensor data to lower system power dissipation
- Integrated Pedometer, Tap, Any-Motion, NoMotion, Significant-Motion detection
- Large sensor dynamic ranges from ±16°/s to ±2048°/s for gyroscope and ±2g to ±16g for accelerometer
- Low power modes for effective power management
- Digitally programmable sampling rate and filters
- Embedded temperature sensor
- Wide extended operating temperature range (-40°C to 85°C)
Applications
- Smartphones
- Game controllers, remote controls and pointing devices
- Robotic vacuums
- E-bikes and scooters
- Bluetooth headsets
- Automotive security systems
- Toys
- Portrait-landscape display control
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 1.8538 | $ 1.85 |
| 10+ | $ 1.5589 | $ 15.59 |
| 30+ | $ 1.396 | $ 41.88 |
| 100+ | $ 1.212 | $ 121.20 |
| 500+ | $ 0.8813 | $ 440.65 |
| 1,000+ | $ 0.8455 | $ 845.50 |
Standard Packaging3000/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Motion Sensors/Accelerometers | |
| Manufacturer | QST | |
| Packaging | LGA-14 | |
| Accelerometer Sensing Axis | X,Y,Z | |
| Output Bits | 16bit | |
| Cache Size | 1.5KB | |
| Features | Synchronization and timestamp;Motion event detection | |
| Standby Current | - | |
| Acceleration Measurement Range (MAX) | ±16g |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Motion Sensors/Accelerometers | |
| Manufacturer | QST | |
| Packaging | LGA-14 | |
| Accelerometer Sensing Axis | X,Y,Z | |
| Output Bits | 16bit |
| Type | Description | |
|---|---|---|
| Cache Size | 1.5KB | |
| Features | Synchronization and timestamp;Motion event detection | |
| Standby Current | - | |
| Acceleration Measurement Range (MAX) | ±16g |
Introduction
The QMI8658A is a complete 6D MEMS inertial measurement unit (IMU). With tight board-level gyroscope sensitivity of ±3%, gyroscope noise density of 13 mdps/ Hz, and low latency, the QMI8658A is ideal for consumer and industrial applications. The QMI8658A incorporates a 3-axis gyroscope and a 3-axis accelerometer. It provides a host-processor interface supporting I3C, I²C and 3-wire or 4-wire SPI. With its built-in digital functionality, low power, and small size, the QMI8658A is the ideal part for applications requiring motion-based functionality.
Features
- Low 13 mdps/ Hz gyroscope noise, low-latency, and wide bandwidth
- Low Noise 150μg/√Hz accelerometer noise
- Host (slave) interface supports MIP1TM I3C, I²C, and 3-wire or 4-wire SPI
- Accelerometer and gyroscope sensors feature signal processing paths with digitally programmable data rates and filtering
- 3-axis gyroscope and 3-axis accelerometer in a small 2.5×3.0×0.86mm 14-pin LGA package
- Large 1536-byte FIFO can be used to buffer sensor data to lower system power dissipation
- Integrated Pedometer, Tap, Any-Motion, NoMotion, Significant-Motion detection
- Large sensor dynamic ranges from ±16°/s to ±2048°/s for gyroscope and ±2g to ±16g for accelerometer
- Low power modes for effective power management
- Digitally programmable sampling rate and filters
- Embedded temperature sensor
- Wide extended operating temperature range (-40°C to 85°C)
Applications
- Smartphones
- Game controllers, remote controls and pointing devices
- Robotic vacuums
- E-bikes and scooters
- Bluetooth headsets
- Automotive security systems
- Toys
- Portrait-landscape display control
C3021082 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | 9029900000 |
| USHTS | 9029908080 |
| TARIC | 9029900010 |
| CAHTS | 9029900000 |
| BRHTS | 90299090 |
| INHTS | 90299000 |
| MXHTS | 9029.90.01 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | 9029900000 |
| USHTS | 9029908080 |
| TARIC | 9029900010 |
| Type | Details |
|---|---|
| CAHTS | 9029900000 |
| BRHTS | 90299090 |
| INHTS | 90299000 |
| MXHTS | 9029.90.01 |