Nisshinbo Micro Devices Inc. R3134N42EA-TR-FE

R3134x Series are CMOS-based voltage detector ICs with built-in delay circuit, high detector threshold accuracy, and ultra low supply current, which can operate at low voltage. These ICs can be used as system reset generators, and each of these ICs consists of a voltage reference, a comparator, resistors for setting voltage detector threshold, an output driver transistor, manual reset circuit, and an output delay generator. Detector threshold is fixed internally with high accuracy and requires no adjustment. When a supply voltage crosses a setting detector threshold voltage from a high value to a lower value, this IC generates reset signal. R3134x Series output "L" at its detect. Since each of R3134x Series embeds an output delay generator, during a setting 240ms delay time, which is fixed in the IC, this IC keeps the reset condition after they are released. Released conditions will be kept for the delay time from when a supply voltage crosses a setting detector threshold voltage from a low value to a higher value, or from when the manual reset signal is released. Two output types, Nch open drain type and CMOS type, are available. Since the packages for these ICs are DFN(PLP)1212-6, SOT-23-5, and SC-88A, high density mounting of the ICs on board is possible.

• Supply Current ... . Typ. 0.8μA (R3134x27Ex, VDD = 3.0V)
• Operating Voltage Range .. .. 0.75V to 6.0V (Topt = 25°C)
• Detector Threshold Range ........ .. 1.0V to 5.0V (0.1V steps)
• Further, 2.32V, 2.63V, 2.93V, 3.08V, 4.38V, and 4.63V can be provided as standard.
• Detector Threshold Accuracy .... .. ±1.8%
• Temperature-Drift Coefficient of Detector Threshold . .. Typ. ±100ppm/°C
• Built-in Delay Time Circuit ..... .. Typ. 240ms
• Output Delay Time Accuracy ......... .. ±15%
• Output Types ...... . Nch Open Drain and CMOS
• Packages . . DFN(PLP)1212-6, SC-88A, SOT-23-5

• CPU and Logic Circuit Reset
• Battery Checker
• Window Comparator
• Wave Shaping Circuit
• Battery Back-up Circuit
• Power Failure Detector