Infineon/CYPRESS CYPD6227-96BZXI

EZ-PD CCG6DF and EZ-PD CCG6SF are dual-port and single-port USB Type-C controllers that comply with the latest USB Type-C and PD specifications. These devices provide a complete USB Type-C and USB Power Delivery port control solution for PCs and notebooks. Both of these devices include a VBUS provider path load switch. These devices also contain a true random number generator (TRNG) for authentication, a 32-bit, 48-MHz Arm Cortex-M0 processor with 64-KB flash and 96-KB ROM, integrating a complete Type-C transceiver including the Type-C termination resistors Rp, Rd, and dead battery Rd termination. CCG6DF is available in a 96-ball BGA package, whereas CCG6SF is available in 48-pin QFN package.

• USB PD:
  • Supports latest USB PD 3.0 specification
  • Fast role swap (FRS)
  • Extended data messaging
• Type-C:
  • Integrated current sources for DFP[1] role (Rp) - Default current at 900 mA
  • 1.5 A
  • 3 A
  • Integrated Rd resistor for upstream facing port (UFP[2]) role
  • Integrated VCONN FETs to power EMCA cables
  • Integrated dead battery termination
  • Integrated high-voltage protection on CC and SBU pins to protect against accidental shorts to the VBUS pin on the Type-C connector
  • Integrated pass through SBU switch for 20-V protection
• Mux:
  • Integrated USB 2.0 analog mux for USB 2.0 HS and UART da
• Integrated provider VBUS load switch:
  • VBUS provider switch (5 V/3 A)
  • Slew rate controlled turn-on on the VBUS provider path, tolerant to 24 V
  • Configurable hardware-controlled VBUS overvoltage, undervoltage, overcurrent, short circuit, reverse current protection, and thermal shutdown
  • VBUS high-side current sense amplifier capable of measuring current across 5-mΩ series resistance on the provider path
  • In response to fast role swap request, turns OFF external consumer N-channel field effect transistor (NFET) and turns ON internal provider load switch
• LDO:
  • Integrated high-voltage LDO operational up to 21.5 V for dead battery mode operation
• 32-bit MCU subsystem:
  • 48-MHz Arm Cortex-M0 CPU
  • 64-KB Flash
  • 96-KB ROM
  • 16-KB SRAM
• Integrated digital blocks:
  • Two integrated timers and counters to meet response times required by the USB PD protocol
  • Four run-time serial communication blocks (SCBs) with reconfigurable I²C, SPI, or UART functionality
• Authentication:
  • True random number generator
• Clocks and oscillators:
  • Integrated oscillator eliminating the need for an external clock
• Operating range:
  • VSYS (2.75 V–5.5 V)
  • VBUS (4 V–21.5 V)
• Hot-swappable I/Os:
  • I²C pins from SCB0 are hot-swappable

• Notebooks and desktops
• Thunderbolt hosts, non-thunderbolt hosts