TI SN74ABT126N
| Manufacturer | |
| MPN | SN74ABT126N |
| LCSC Part # | C1548485 |
| Packaging | PDIP-14 |
| Customer # | |
| Key Attributes | 4.5V~5.5V 1 4 250uA PDIP-14 Buffers, Drivers, Receivers, Transceivers RoHS |
| Datasheet |  TI SN74ABT126N |
| RoHS Compliance | 1 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | PDIP-14 | |
| Current - Output High(IOH) | 32mA | |
| Input type | - | |
| Series | 74ABT | |
| Voltage - Supply | 4.5V~5.5V | |
| Output Type | Tri-State | |
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 1 | |
| Channel Type | - | |
| Features | Power-off isolation;Output enable;Hot-swap support | |
| Number of Elements | 4 | |
| Quiescent Current | 250uA | |
| Propagation Delay | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | PDIP-14 | |
| Current - Output High(IOH) | 32mA | |
| Input type | - | |
| Series | 74ABT | |
| Voltage - Supply | 4.5V~5.5V | |
| Output Type | Tri-State |
| Type | Description | |
|---|---|---|
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 1 | |
| Channel Type | - | |
| Features | Power-off isolation;Output enable;Hot-swap support | |
| Number of Elements | 4 | |
| Quiescent Current | 250uA | |
| Propagation Delay | - |
Introduction
The ’ABT126 bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low. When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features
- Typical V₀ₗₚ (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25℃
- High-Impedance State During Power Up and Power Down
- High-Drive Outputs (−32-mA IOH, 64-mA IOL)
- Ioff and Power-Up 3-State Support Hot Insertion
- Latch-Up Performance Exceeds 500 mA Per JESD 17
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 0.3569 | $ 0.36 |
| 200+ | $ 0.1381 | $ 27.62 |
| 500+ | $ 0.1333 | $ 66.65 |
| 1,000+ | $ 0.1309 | $ 130.90 |
Standard Packaging25/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | PDIP-14 | |
| Current - Output High(IOH) | 32mA | |
| Input type | - | |
| Series | 74ABT | |
| Voltage - Supply | 4.5V~5.5V | |
| Output Type | Tri-State | |
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 1 | |
| Channel Type | - | |
| Features | Power-off isolation;Output enable;Hot-swap support | |
| Number of Elements | 4 | |
| Quiescent Current | 250uA | |
| Propagation Delay | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | PDIP-14 | |
| Current - Output High(IOH) | 32mA | |
| Input type | - | |
| Series | 74ABT | |
| Voltage - Supply | 4.5V~5.5V | |
| Output Type | Tri-State |
| Type | Description | |
|---|---|---|
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 1 | |
| Channel Type | - | |
| Features | Power-off isolation;Output enable;Hot-swap support | |
| Number of Elements | 4 | |
| Quiescent Current | 250uA | |
| Propagation Delay | - |
Introduction
The ’ABT126 bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low. When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features
- Typical V₀ₗₚ (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25℃
- High-Impedance State During Power Up and Power Down
- High-Drive Outputs (−32-mA IOH, 64-mA IOL)
- Ioff and Power-Up 3-State Support Hot Insertion
- Latch-Up Performance Exceeds 500 mA Per JESD 17
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
C1548485 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |