Melexis MLX90316KDC-BCG-200-TU

The MLX90316 is a Tria⊗is® Rotary Position Sensor providing the absolute angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet). Thanks to an Integrated Magneto-Concentrator (IMC) on its surface, the monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density. This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (airgap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360 Deg. - complete revolution) and processed by the onchip DSP (Digital Signal Processing) to ultimately report the absolute angular position of the magnet either as a ratiometric analog output or as PWM (Pulse-Width Modulation) signal or as a 14-bit data accessible through a 3-pin SPI (serial interface) channel. The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range...) to match any specific requirement through end-of-line calibration. The Melexis programming unit PTC-04 communicates and calibrates the device exclusively through the connector terminals (VDDVSS-OUT).

• Absolute Rotary Position Sensor IC
• Simple & Robust Magnetic Design
• Tria⊗is® Hall Technology
• Programmable Angular Range up to 360 Degrees
• Programmable Linear Transfer Characteristic
• Selectable Analog (Ratiometric), PWM, Serial Protocol
• 12 bit Angular Resolution - 10 bit Angular Thermal Accuracy
• 40 bit ID Number
• Single Die – SOIC-8 Package RoHS Compliant
• Dual Die (Full Redundant) – TSSOP-16 Package RoHS Compliant

• Absolute Rotary Position Sensor
• Steering Wheel Position Sensor
• Pedal Position Sensor
• Motor-shaft Position Sensor
• Throttle Position Sensor
• Float-Level Sensor
• Ride Height Position Sensor
• Non-Contacting Potentiometer