TI UCC27282QDRCTQ1

The UCC27282-Q1 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3.5-A peak sink current and 2.5-A peak source current along with low pull-up and pull-down resistance allows the UCC27282-Q1 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27282-Q1 can be used in conjunction with both analog and digital controllers. The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. Input interlock further improves robustness and system reliability in high noise applications. The enable and disable functionality provides additional system flexibility by reducing power consumption by the driver and responds to fault events within the system. 5-V UVLO allows systems to operate at lower bias voltages, which is necessary in many high frequency applications and improves system efficiency in certain operating modes. Small propagation delay and delay matching specifications minimize the dead-time requirement which further improves efficiency. Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. An integrated bootstrap diode eliminates the need for an external discrete diode in many applications, which saves board space and reduces system cost. UCC27282-Q1 is offered in a small package enabling high density designs.

• AEC-Q100 qualified with following results
• Temperature grade 1 (Tj = -40°C to 150°C)
• HBM ESD classification level 1B
• CDM ESD classification level C3
• Drives two N-channel MOSFETs in high-side low side configuration
• 5-V typical under voltage lockout
• Input interlock
• Enable/disable functionality in DRC package
• 16-ns typical propagation delay
• 12-ns rise, 10-ns fall time with 1.8-nF load
• 1-ns typical delay matching
• Absolute Maximum Negative Voltage Handling on Inputs (-5 V)
• Absolute Maximum Negative Voltage Handling on HS (–14 V)
• 3.5-A sink, 2.5-A Source output currents
• Absolute maximum boot voltage 120 V
• Low current (7-μA) consumption when disabled
• Integrated bootstrap diode

• Automotive DC/DC converters
• Electric power steering
• On-board charger (OBC)
• Integrated belt starter generator (iBSG)
• Automotive HVAC compressor modules