ADI LTM2895CY#PBF
| Produttore | |
| Cod. Prod. | LTM2895CY#PBF |
| Cod. LCSC | C690403 |
| Imballo | BGA-36 |
| Numero Cliente | |
| Attr. chiave | 100kV/us BGA-36 Digital Isolators RoHS |
| Scheda Tecnica |  ADI LTM2895CY#PBF |
| Conformità RoHS | 1 documenti disponibili |
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Isolators/Digital Isolators | |
| Produttore | ADI | |
| Imballo | BGA-36 | |
| Features | Multiple isolated sheet selection;Fault detection and status indication | |
| CMTI(kV/us) | 100kV/us | |
| Operating Temperature | 0℃~+70℃ | |
| Isolation Voltage(Vrms) | 6000 |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Isolators/Digital Isolators | |
| Produttore | ADI | |
| Imballo | BGA-36 | |
| Features | Multiple isolated sheet selection;Fault detection and status indication |
| Tipo | Descrizione | |
|---|---|---|
| CMTI(kV/us) | 100kV/us | |
| Operating Temperature | 0℃~+70℃ | |
| Isolation Voltage(Vrms) | 6000 |
Descrizione
The LTM2895 is a high speed isolated µModule (micromodule) SPI interface with DAC control signals designed to isolate LTC’s family of general purpose DACs and to isolate general purpose SPI interfaces. The LTM2895 works with DACs and general purpose devices that have a mode (0, 0) SPI interface.
The interface enables fast data throughput, which makes the LTM2895 ideally suited for a wide variety of applications. The high speed SPI-compatible serial port supports 1.71V to 5.5V logic supplies. The LTM2895 is targeted at generic SPI and digital-to-analog converter applications.
The isolation barrier tolerates large voltage ground variations between the logic interface and the isolated side of the LTM2895. Uninterrupted communication is maintained during voltage transients greater than 50kV/µs.
Caratteristiche
- Isolated Interface: 6000VRMS for 1 Minute
- CSA (IEC/UL) Approved, File #255632
- 100MHz SPI-Compatible I/O
- Configurable SPI Word-Length: 8 to 32 Bits
- Supports Two Isolated Chip Selects
- Falling Edge Sensitive Low Jitter LOAD
- Three Isolated Control or Multiplexer Signals
- 1.71V to 5.5V I/O Voltages
- 3V to 5.5V Supply Voltages
- High Common Mode Transient Immunity
- 15mm x 6.25mm BGA Package
Applicazioni
- Remote Interface Control
- Industrial Process Control and Automation
- Test and Measurement Equipment
- Breaking Ground Loops
| Qtà | Pr. unit.(Solo per riferimento) | Importo totale |
|---|---|---|
| 1+ | $ 14.6846 | $ 14.68 |
| 200+ | $ 5.6831 | $ 1136.62 |
| 500+ | $ 5.484 | $ 2742.00 |
| 1,000+ | $ 5.3852 | $ 5385.20 |
Package Standard160/Full Tray | ||
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Isolators/Digital Isolators | |
| Produttore | ADI | |
| Imballo | BGA-36 | |
| Features | Multiple isolated sheet selection;Fault detection and status indication | |
| CMTI(kV/us) | 100kV/us | |
| Operating Temperature | 0℃~+70℃ | |
| Isolation Voltage(Vrms) | 6000 |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Isolators/Digital Isolators | |
| Produttore | ADI | |
| Imballo | BGA-36 | |
| Features | Multiple isolated sheet selection;Fault detection and status indication |
| Tipo | Descrizione | |
|---|---|---|
| CMTI(kV/us) | 100kV/us | |
| Operating Temperature | 0℃~+70℃ | |
| Isolation Voltage(Vrms) | 6000 |
Descrizione
The LTM2895 is a high speed isolated µModule (micromodule) SPI interface with DAC control signals designed to isolate LTC’s family of general purpose DACs and to isolate general purpose SPI interfaces. The LTM2895 works with DACs and general purpose devices that have a mode (0, 0) SPI interface.
The interface enables fast data throughput, which makes the LTM2895 ideally suited for a wide variety of applications. The high speed SPI-compatible serial port supports 1.71V to 5.5V logic supplies. The LTM2895 is targeted at generic SPI and digital-to-analog converter applications.
The isolation barrier tolerates large voltage ground variations between the logic interface and the isolated side of the LTM2895. Uninterrupted communication is maintained during voltage transients greater than 50kV/µs.
Caratteristiche
- Isolated Interface: 6000VRMS for 1 Minute
- CSA (IEC/UL) Approved, File #255632
- 100MHz SPI-Compatible I/O
- Configurable SPI Word-Length: 8 to 32 Bits
- Supports Two Isolated Chip Selects
- Falling Edge Sensitive Low Jitter LOAD
- Three Isolated Control or Multiplexer Signals
- 1.71V to 5.5V I/O Voltages
- 3V to 5.5V Supply Voltages
- High Common Mode Transient Immunity
- 15mm x 6.25mm BGA Package
Applicazioni
- Remote Interface Control
- Industrial Process Control and Automation
- Test and Measurement Equipment
- Breaking Ground Loops
C690403 Libreria EasyEDA
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Tipo | Dettagli |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |