ADI LT1814IS#TRPBF

The LT1813/LT1814 are dual and quad, low power, high speed, very high slew rate operational amplifiers with excellent DC performance. The LT1813/LT1814 feature reduced supply current, lower input offset voltage, lower input bias current and higher DC gain than other devices with comparable bandwidth. The circuit topology is a voltage feedback amplifier with the slewing characteristics of a current feedback amplifier. The output drives a 100Ω load to ±3.5V with ±5V supplies. On a single 5V supply, the output swings from 1.1V to 3.9V with a 100Ω load connected to 2.5V. The amplifiers are stable with a 1000pF capacitive load making them useful in buffer and cable driver applications. The LT1813/LT1814 are manufactured on Linear Technology’s advanced low voltage complementary bipolar process. The LT1813 dual op amp is available in 8-pin MSOP, SO and 3mm x 3mm low profile (0.8mm) dual fine pitch leadless packages (DFN). The quad LT1814 is available in 14-pin SO and 16-pin SSOP packages. A single version, the LT1812, is also available (see separate data sheet).

• 100MHz Gain Bandwidth Product
• 750V/µs Slew Rate
• 3.6mA Maximum Supply Current per Amplifier
• Tiny 3mm x 3mm x 0.8mm DFN Package
• 8nV/√Hz Input Noise Voltage
• Unity-Gain Stable
• 1.5mV Maximum Input Offset Voltage
• 4µA Maximum Input Bias Current
• 400nA Maximum Input Offset Current
• 40mA Minimum Output Current, VOUT = ±3V
• ±3.5V Minimum Input CMR, VS = ±5V
• 30ns Settling Time to 0.1%, 5V Step
• Specified at ±5V, Single 5V Supplies
• Operating Temperature Range: -40°C to 85°C

• Active Filters
• Wideband Amplifiers
• Buffers
• Video Amplification
• Communication Receivers
• Cable Drivers
• Data Acquisition Systems
• Bandpass Filter with Independently Settable Gain, Q and fC