LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
ADI AD7997BRUZ-1 product image
Immagini a scopo illustrativo

ADI AD7997BRUZ-1

Produttore
Cod. Prod.
AD7997BRUZ-1
Cod. LCSC
C652134
Imballo
TSSOP-20
Numero Cliente
Attr. chiave
8-Channel, 10- and 12-Bit ADCs with I²C-Compatible Interface
Scheda Tecnicapdf iconADI AD7997BRUZ-1
Conformità RoHS1 documenti disponibili
Parti alternative3
Disponibile: 13
13 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 5.6437$ 5.64
10+$ 5.507$ 55.07
30+$ 5.4143$ 162.43
100+$ 5.3233$ 532.33
Package Standard75/Full Tube
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC)
ProduttoreADI
ImballoTSSOP-20
Operating Temperature-40℃~+85℃
InterfaceI2C
Quiescent Current (Iq)1uA
Voltage - Supply2.7V~5.5V
Number of Channels8
Integral non - linearity0.5LSB
Voltage ReferenceExternal
Clock/OscillatorExternal
Clock Frequency3.4MHz
FeaturesMultiplexers;Synchronous triggering
Resolution(Bits)188kHz;10
S/N Ratio-
DNL (LSB)0.5LSB
ADC architectureSAR
Programmable GainNot supported

Descrizione

Traduzione AI

The AD7997/AD7998 are 8-channel, 10- and 12-bit, low power, successive approximation ADCs with an I²C-compatible interface. The parts operate from a single 2.7 V to 5.5 V power supply and feature a 2 μs conversion time. The parts contain an 8-channel multiplexer and track-and-hold amplifier that can handle input frequencies up to 11 MHz. The AD7997/AD7998 provide a 2-wire serial interface that is compatible with I²C interfaces. Each part comes in two versions, AD7997-0/AD7998-0 and AD7997-1/AD7998-1, and each version allows at least two different I²C addresses. The I²C interface on the AD7997-0/AD7998-0 supports standard and fast I²C interface modes. The I²C interface on the AD7997-1/ AD7998-1 supports standard, fast, and high speed I²C interface modes. The AD7997/AD7998 normally remain in a shutdown state while not converting, and power up only for conversions. The conversion process can be controlled using the CONVST pin, by a command mode where conversions occur across I²C write operations or an automatic conversion interval mode selected through software control. The AD7997/AD7998 require an external reference that should be applied to the REF_IN pin and can be in the range of 1.2 V to VDD. This allows the widest dynamic input range to the ADC. On-chip limit registers can be programmed with high and low limits for the conversion result, and an open-drain, out-ofrange indicator output (ALERT) becomes active when the programmed high or low limits are violated by the conversion result. This output can be used as an interrupt.

Caratteristiche

Traduzione AI
  • 10- and 12-bit ADC with fast conversion time: 2 μs typ
  • 8 single-ended analog input channels
  • Specified for VDD of 2.7 V to 5.5 V
  • Low power consumption
  • Fast throughput rate: up to 188 kSPS
  • Sequencer operation
  • Automatic cycle mode
  • I²C-compatible serial interface supports standard, fast, and high speed modes
  • Out-of-range indicator/alert function
  • Pin-selectable addressing via AS
  • Shutdown mode: 1 μA max
  • Temperature range: -40°C to +85°C
  • 20-lead TSSOP package

Parti alternative

MPNProduttoreConfezioneDisponibilitàPrezzo unitario
AD7997BRUZ-1REELADITSSOP-2033$ 8.5627
AD7997BRUZ-0REELADITSSOP-2029$ 8.3579
AD7997BRUZ-0ADITSSOP-200$ 4.6791