Broadcom HCPL-3100-300E
| Manufacturer | |
| MPN | HCPL-3100-300E |
| LCSC Part # | C19572303 |
| Packaging | DIP-8 |
| Customer # | |
| Key Attributes | 100mA 6V 1.2V 15V~30V DC DIP-8 Logic Output Optoisolators RoHS |
| Datasheet |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | Broadcom | |
| Packaging | DIP-8 | |
| Load Voltage | - | |
| Power Dissipation | 550mW | |
| Output Current | 100mA | |
| Low Level Delay Time | 2us | |
| High Level Delay Time | 2us | |
| Features | - | |
| Reverse Voltage | 6V | |
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.2V | |
| Voltage - Supply | 15V~30V | |
| Forward Current(If) | 20mA | |
| Operating Temperature | -40℃~+70℃ | |
| CMTI(kV/us) | 15kV/us | |
| Number of Channels | 1 | |
| Input threshold current | 7mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | Broadcom | |
| Packaging | DIP-8 | |
| Load Voltage | - | |
| Power Dissipation | 550mW | |
| Output Current | 100mA | |
| Low Level Delay Time | 2us | |
| High Level Delay Time | 2us | |
| Features | - | |
| Reverse Voltage | 6V |
| Type | Description | |
|---|---|---|
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.2V | |
| Voltage - Supply | 15V~30V | |
| Forward Current(If) | 20mA | |
| Operating Temperature | -40℃~+70℃ | |
| CMTI(kV/us) | 15kV/us | |
| Number of Channels | 1 | |
| Input threshold current | 7mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
Introduction
The HCPL-3100/3101 consists of an LED optically coupled to an integrated circuit with a power output stage. These optocouplers are suited for driving power MOSFETs and IGBTs used in motor control inverter applications. The high operating voltage range of the output stage provides the voltage drives required by gate controlled devices. The voltage and current supplied by these optocouplers allow for direct interfacing to the power device without the need for an intermediate amplifier stage.
Features
- High output current I₀₁ and |I₀₂| (0.6 A Peak, 0.1 A continuous)
- 15 kV/μs minimum Common Mode Rejection (CMR) at VCM = 1500 V
- Wide operating VCC range (15 to 30 volts)
- High speed – 1 μs typical propagation delay (HCPL-3100) – 0.3 μs typical propagation delay (HCPL-3101)
- Recognized under UL 1577 for dielectric withstand proof test voltages of 5000 vac, 1 minute
Applications
- Isolated MOSFET/IGBT gate drive
- AC and DC motor drives
- General purpose industrial inverters
- Uninterruptable power supply
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 3.7475 | $ 3.75 |
| 200+ | $ 1.496 | $ 299.20 |
| 500+ | $ 1.4459 | $ 722.95 |
| 1,000+ | $ 1.4216 | $ 1421.60 |
Standard Packaging50/Full Bag | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | Broadcom | |
| Packaging | DIP-8 | |
| Load Voltage | - | |
| Power Dissipation | 550mW | |
| Output Current | 100mA | |
| Low Level Delay Time | 2us | |
| High Level Delay Time | 2us | |
| Features | - | |
| Reverse Voltage | 6V | |
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.2V | |
| Voltage - Supply | 15V~30V | |
| Forward Current(If) | 20mA | |
| Operating Temperature | -40℃~+70℃ | |
| CMTI(kV/us) | 15kV/us | |
| Number of Channels | 1 | |
| Input threshold current | 7mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | Broadcom | |
| Packaging | DIP-8 | |
| Load Voltage | - | |
| Power Dissipation | 550mW | |
| Output Current | 100mA | |
| Low Level Delay Time | 2us | |
| High Level Delay Time | 2us | |
| Features | - | |
| Reverse Voltage | 6V |
| Type | Description | |
|---|---|---|
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.2V | |
| Voltage - Supply | 15V~30V | |
| Forward Current(If) | 20mA | |
| Operating Temperature | -40℃~+70℃ | |
| CMTI(kV/us) | 15kV/us | |
| Number of Channels | 1 | |
| Input threshold current | 7mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
Introduction
The HCPL-3100/3101 consists of an LED optically coupled to an integrated circuit with a power output stage. These optocouplers are suited for driving power MOSFETs and IGBTs used in motor control inverter applications. The high operating voltage range of the output stage provides the voltage drives required by gate controlled devices. The voltage and current supplied by these optocouplers allow for direct interfacing to the power device without the need for an intermediate amplifier stage.
Features
- High output current I₀₁ and |I₀₂| (0.6 A Peak, 0.1 A continuous)
- 15 kV/μs minimum Common Mode Rejection (CMR) at VCM = 1500 V
- Wide operating VCC range (15 to 30 volts)
- High speed – 1 μs typical propagation delay (HCPL-3100) – 0.3 μs typical propagation delay (HCPL-3101)
- Recognized under UL 1577 for dielectric withstand proof test voltages of 5000 vac, 1 minute
Applications
- Isolated MOSFET/IGBT gate drive
- AC and DC motor drives
- General purpose industrial inverters
- Uninterruptable power supply
C19572303 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| Type | Details |
|---|---|
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |

