- Pinout
- Footprint
onsemi MC12093DG
| Manufacturer | |
| MPN | MC12093DG |
| LCSC Part # | C897745 |
| Packaging | SOIC-8 |
| Customer # | |
| Key Attributes | 1.1GHz 2.7V~5.5V 3ps 1 SOIC-8 Clock Generators, PLLs, Frequency Synthesizers RoHS |
| Datasheet |  onsemi MC12093DG |
| RoHS Compliance | 4 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | SOIC-8 | |
| Operating Temperature | -40℃~+85℃ | |
| Output Frequency(Max) | 1.1GHz | |
| Voltage - Supply | 2.7V~5.5V | |
| Period Jitter, Peak-to-Peak | 3ps | |
| Features | - | |
| Phase Jitter | 500fs | |
| Number of Outputs | 1 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | SOIC-8 | |
| Operating Temperature | -40℃~+85℃ | |
| Output Frequency(Max) | 1.1GHz |
| Type | Description | |
|---|---|---|
| Voltage - Supply | 2.7V~5.5V | |
| Period Jitter, Peak-to-Peak | 3ps | |
| Features | - | |
| Phase Jitter | 500fs | |
| Number of Outputs | 1 |
Introduction
The MC12093 is a single modulus prescaler for low power frequency division of a 1.1 GHz high frequency input signal. MOSAIC VTM technology is utilized to achieve low power dissipation of 6.75 mW at a minimum supply voltage of 2.7 V. On-chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control inputs SW1 and SW2 select the required divide ratio of ÷2,÷4, or ÷8. Stand-By mode is featured to reduce current drain to 50 μA typical when the standby pin SB is switched LOW disabling the prescaler.
Features
- 1.1 GHz Toggle Frequency
- Supply Voltage 2.7 V to 5.5 Vdc
- Low Power 3.0 mA Typical
- Operating Temperature = -40°C to 85°C
- Divide by 2, 4 or 8 Selected by SW1 and SW2 Pins
- On-Chip Termination
- These Devices are Pb-Free, Halogen Free and are RoHS Compliant
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 6.9447 | $ 6.94 |
| 10+ | $ 6.782 | $ 67.82 |
| 30+ | $ 6.6729 | $ 200.19 |
| 98+ | $ 6.5655 | $ 643.42 |
Standard Packaging98/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | SOIC-8 | |
| Operating Temperature | -40℃~+85℃ | |
| Output Frequency(Max) | 1.1GHz | |
| Voltage - Supply | 2.7V~5.5V | |
| Period Jitter, Peak-to-Peak | 3ps | |
| Features | - | |
| Phase Jitter | 500fs | |
| Number of Outputs | 1 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | SOIC-8 | |
| Operating Temperature | -40℃~+85℃ | |
| Output Frequency(Max) | 1.1GHz |
| Type | Description | |
|---|---|---|
| Voltage - Supply | 2.7V~5.5V | |
| Period Jitter, Peak-to-Peak | 3ps | |
| Features | - | |
| Phase Jitter | 500fs | |
| Number of Outputs | 1 |
Introduction
The MC12093 is a single modulus prescaler for low power frequency division of a 1.1 GHz high frequency input signal. MOSAIC VTM technology is utilized to achieve low power dissipation of 6.75 mW at a minimum supply voltage of 2.7 V. On-chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control inputs SW1 and SW2 select the required divide ratio of ÷2,÷4, or ÷8. Stand-By mode is featured to reduce current drain to 50 μA typical when the standby pin SB is switched LOW disabling the prescaler.
Features
- 1.1 GHz Toggle Frequency
- Supply Voltage 2.7 V to 5.5 Vdc
- Low Power 3.0 mA Typical
- Operating Temperature = -40°C to 85°C
- Divide by 2, 4 or 8 Selected by SW1 and SW2 Pins
- On-Chip Termination
- These Devices are Pb-Free, Halogen Free and are RoHS Compliant
C897745 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |