VISHAY SFH6345
| Manufacturer | |
| MPN | SFH6345 |
| LCSC Part # | C7500575 |
| Packaging | DIP-8 |
| Customer # | |
| Key Attributes | Analog High Speed Coupler, High Noise Immunity |
| Datasheet |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Transistor, Photovoltaic Output Optoisolators | |
| Manufacturer | VISHAY | |
| Packaging | DIP-8 | |
| Output Current | 8mA | |
| Vce Saturation(VCE(sat)) | 100mV@16mA,2.4mA | |
| Load Voltage | - | |
| Reverse Voltage | 3V | |
| Current transfer ratio | -;15% | |
| Voltage - Forward(Vf) | 1.33V | |
| Forward Current(If) | 25mA | |
| Output Type | Phototransistor | |
| Input type | DC | |
| Isolation Voltage(Vrms) | 5.3kV | |
| Number of Channels | 1 | |
| Total Power Dissipation(Pd) | 100mW | |
| Features | Open-collector output |
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Transistor, Photovoltaic Output Optoisolators | |
| Manufacturer | VISHAY | |
| Packaging | DIP-8 | |
| Output Current | 8mA | |
| Vce Saturation(VCE(sat)) | 100mV@16mA,2.4mA | |
| Load Voltage | - | |
| Reverse Voltage | 3V | |
| Current transfer ratio | -;15% |
| Type | Description | |
|---|---|---|
| Voltage - Forward(Vf) | 1.33V | |
| Forward Current(If) | 25mA | |
| Output Type | Phototransistor | |
| Input type | DC | |
| Isolation Voltage(Vrms) | 5.3kV | |
| Number of Channels | 1 | |
| Total Power Dissipation(Pd) | 100mW | |
| Features | Open-collector output |
Introduction
The SFH6345 is an optocoupler with a GaAlAs infrared emitting diode, optically coupled to an integrated photo detector consisting of a photo diode and a high speed transistor in a DIP-8 plastic package. The device is similar to the 6N135 but has an additional Faraday shield on the detector which enhances the input-output dV/dt immunity. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. This an ideal solution for industrial communication bus isolation, as well as isolated drive circuit applications such as IPM (intelligent power module) drivers.
Features
- High speed optocoupler without base connection Pb-free
- Isolation test voltage: 5300 VRMS
- GaAlAs emitter
- Integrated detector with photo diode and transistor RoHS COMPLIANT
- High data transmission rate: 1 MBit/s HALOGEN
- TTL compatible FREE
- Open collector output GREEN [5-2008)
- Good CTR linearity relative to forward current
- Field effect stable
- Low coupling capacitance
- Very high common mode transient immunity dV/dt: ≥15 kV/μs at VCM = 1500 V
Applications
- Data communications
- IGBT drivers
- Programmable controllers
- IPM (intelligent power module) drivers
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 2.3971 | $ 2.40 |
| 10+ | $ 2.0349 | $ 20.35 |
| 50+ | $ 1.8081 | $ 90.41 |
| 100+ | $ 1.5747 | $ 157.47 |
| 500+ | $ 1.4703 | $ 735.15 |
| 1,000+ | $ 1.4246 | $ 1424.60 |
Standard Packaging50/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Transistor, Photovoltaic Output Optoisolators | |
| Manufacturer | VISHAY | |
| Packaging | DIP-8 | |
| Output Current | 8mA | |
| Vce Saturation(VCE(sat)) | 100mV@16mA,2.4mA | |
| Load Voltage | - | |
| Reverse Voltage | 3V | |
| Current transfer ratio | -;15% | |
| Voltage - Forward(Vf) | 1.33V | |
| Forward Current(If) | 25mA | |
| Output Type | Phototransistor | |
| Input type | DC | |
| Isolation Voltage(Vrms) | 5.3kV | |
| Number of Channels | 1 | |
| Total Power Dissipation(Pd) | 100mW | |
| Features | Open-collector output |
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Transistor, Photovoltaic Output Optoisolators | |
| Manufacturer | VISHAY | |
| Packaging | DIP-8 | |
| Output Current | 8mA | |
| Vce Saturation(VCE(sat)) | 100mV@16mA,2.4mA | |
| Load Voltage | - | |
| Reverse Voltage | 3V | |
| Current transfer ratio | -;15% |
| Type | Description | |
|---|---|---|
| Voltage - Forward(Vf) | 1.33V | |
| Forward Current(If) | 25mA | |
| Output Type | Phototransistor | |
| Input type | DC | |
| Isolation Voltage(Vrms) | 5.3kV | |
| Number of Channels | 1 | |
| Total Power Dissipation(Pd) | 100mW | |
| Features | Open-collector output |
Introduction
The SFH6345 is an optocoupler with a GaAlAs infrared emitting diode, optically coupled to an integrated photo detector consisting of a photo diode and a high speed transistor in a DIP-8 plastic package. The device is similar to the 6N135 but has an additional Faraday shield on the detector which enhances the input-output dV/dt immunity. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. This an ideal solution for industrial communication bus isolation, as well as isolated drive circuit applications such as IPM (intelligent power module) drivers.
Features
- High speed optocoupler without base connection Pb-free
- Isolation test voltage: 5300 VRMS
- GaAlAs emitter
- Integrated detector with photo diode and transistor RoHS COMPLIANT
- High data transmission rate: 1 MBit/s HALOGEN
- TTL compatible FREE
- Open collector output GREEN [5-2008)
- Good CTR linearity relative to forward current
- Field effect stable
- Low coupling capacitance
- Very high common mode transient immunity dV/dt: ≥15 kV/μs at VCM = 1500 V
Applications
- Data communications
- IGBT drivers
- Programmable controllers
- IPM (intelligent power module) drivers
C7500575 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| Type | Details |
|---|---|
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |



