LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
ADI LTM4622IV#PBF product image
  • LTM4622IV#PBF thumbnail 1
  • LTM4622IV#PBF thumbnail 2
  • LTM4622IV#PBF thumbnail 3
  • Diagramma pin
  • Footprint
Immagini a scopo illustrativo

ADI LTM4622IV#PBF

Produttore
ADI
Cod. Prod.
LTM4622IV#PBF
Cod. LCSC
C459148
Imballo
LGA-25(6.2x6.2)
Numero Cliente
Attr. chiave
Dual 2.5A or Single 5A Step-Down DC/DC μModule Regulator
Scheda Tecnicapdf iconADI LTM4622IV#PBF
Conformità RoHS1 documenti disponibili
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 24.8282$ 24.83
30+$ 22.7562$ 682.69
Package Standard260/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaPower Supplies/Power Suppliers - Board Mount/DC DC Converters
ProduttoreADI
ImballoLGA-25(6.2x6.2)
Synchronous RectifierYes
FunctionStep-down type
Number of Outputs2
TopologyBuck
Output TypeAdjustable
Iout2.5A
Output Voltage600mV~5.5V
Frequency - Switching1MHz
Operating Temperature-40℃~+125℃
FeaturesCycle-by-cycle current limiting;Frequency synchronization;Output voltage tracking;Light load efficient mode;Adjustable soft-start;Operating status indication;Overcurrent Protection
Voltage - Supply3.6V~20V
Quiescent Current500uA
Segnala un erroreMostra prodotti simili (0) >

Descrizione

Traduzione AI

The LTM4622 is a complete dual 2.5A step-down switching mode µModule (powermodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA packages. Included in the package are the switching controller, power FETs, inductor and support components. Operating over an input voltage range of 3.6 to 20V, the LTM4622 supports an output voltage range of 0.6 to 5.5V, set by a single external resistor. Its high efficiency design delivers dual 2.5A continuous, 3A peak, output current. Only a few ceramic input and output capacitors are needed. The LTM4622 supports selectable Burst Mode operation and output voltage tracking for supply rail sequencing. Its high switching frequency and current mode control enable a very fast transient response to line and load changes without sacrificing stability.

Caratteristiche

Traduzione AI
  • Complete Solution in <1cm2
  • Wide Input Voltage Range: 3.6V to 20V
  • 3.3V Input Compatible with VIN Tied to GND
  • 0.61 to 5.5V Output Voltage
  • Dual 2.5A (3A Peak) or Single 5A Output Current
  • ±1.5% Maximum Total Output Voltage Regulation
  • Error Over Load, Line and Temperature
  • Current Mode Control, Fast Transient Response
  • External Frequency Synchronization
  • Multiphase Parallelable with Current Sharing
  • Output Voltage Tracking and Soft-Start Capability
  • Selectable Burst Mode Operation
  • Overvoltage Input and Overtemperature Protection
  • Power Good Indicators
  • 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA Packages

Applicazioni

Traduzione AI
  • General Purpose Point-of-Load Conversion
  • Telecom, Networking and Industrial Equipment
  • Medical Diagnostic Equipment
  • Test and Debug Systems