LCSC Electronics logoLCSC Electronics svg logo
登入
USD
購物車
ST VND7020AJTR product image
  • VND7020AJTR thumbnail 1
  • VND7020AJTR thumbnail 2
  • VND7020AJTR thumbnail 3
  • 引腳圖
  • 封裝圖
圖片僅供參考

ST VND7020AJTRRoHS

製造商
ST
製造商料號
VND7020AJTR
LCSC 編號
C454195
包裝
PowerSSO-16
客戶編號
關鍵特性
Double Channel High-Side Driver with MultiSense Analog Feedback for Automotive Applications
數據手冊pdf iconST VND7020AJTR
現貨: 15
15 現貨，極速出貨
最小值: 1倍數: 1銷售單位: Piece
添加到BOM清單
數量單價總金額
1+$ 1.8034$ 1.80
10+$ 1.5088$ 15.09
30+$ 1.3249$ 39.75
100+$ 1.1361$ 113.61
500+$ 1.0514$ 525.70
1,000+$ 1.014$ 1014.00
標準封裝2500/Full Reel
數量更多價格更優？
$

產品規格

全選
類型描述
類別Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers
製造商ST
包裝PowerSSO-16
Operating Temperature-40℃~+150℃
FeaturesOvercurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Latch protection
number of channels2
Control Input LogicActive High
Maximum Continuous Current45A
RDS(on)22mΩ
Operating Voltage4V~28V
TypeHigh Side Switch
回報錯誤顯示相似產品 (0) >

概述

AI 翻譯

The device is a double channel high-side driver manufactured using ST proprietary VIPower M0 - 7 technology and housed in PowerSSO - 16 package. The device is designed to drive 12 V automotive grounded loads through a 2V and 5 V CMOS - compatible interface, providing protection and diagnostics. The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch - off. A FaultRST pin unlatches the output in case of fault or disables the latch - off functionality. A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions including high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to VCC and OFF - state open - load. A sense enable pin allows OFF - state diagnosis to be disabled during the module low - power mode as well as external sense resistor sharing among similar devices.

特性

AI 翻譯
  • AEC - Q100 qualified
  • General Double channel smart high side driver with MultiSense analog feedback
  • Very low standby current
  • Compatible with 2V and 5 V CMOS outputs
  • MultiSense diagnostic functions
  • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
  • Overload and short to ground (power limitation) indication
  • Thermal shutdown indication
  • OFF - state open - load detection
  • Output short to VCC detection
  • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch - off on overtemperature or power limitation with dedicated fault reset pin
  • Loss of ground and loss of VCC
  • Reverse battery with external components
  • Electrostatic discharge protection

應用領域

AI 翻譯
  • All types of Automotive resistive, inductive and capacitive loads
  • Specially intended for automotive turn indicators (up to 2x P27W or SAE1156 and R5W paralleled or LED rear combinations)