LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
TI SN74LV8153PWR product image
  • SN74LV8153PWR thumbnail 1
  • SN74LV8153PWR thumbnail 2
  • SN74LV8153PWR thumbnail 3
  • Pinout
  • Footprint
Images for reference only

TI SN74LV8153PWRRoHS

Manufacturer
TI
MPN
SN74LV8153PWR
LCSC Part #
C129341
Packaging
TSSOP-20
Customer #
Key Attributes
SERIAL-TO-PARALLEL INTERFACE
Datasheetpdf iconTI SN74LV8153PWR
In-Stock: 2
2 In stock, ships now
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 1.1838$ 1.18
10+$ 1.1555$ 11.56
30+$ 1.1381$ 34.14
100+$ 1.1192$ 111.92
Standard Packaging2000/Full Reel
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Logic/Shift Registers
ManufacturerTI
PackagingTSSOP-20
Operating temperature-40℃~+85℃
Voltage - Supply3V~5.5V
Output TypePush-Pull
Series74LV
Output Current40mA
FeaturesOutput enable
Propagation Delay150ns@5V,50pF
FunctionSerial-to-Parallel
Report an ErrorShow similar products (0) >

Introduction

AI Translation

The SN74LV8153 is a serial- to- parallel data converter. It accepts serial input data and outputs 8- bit parallel data. The automatic data- rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real- estate savings. The OUTSEL pin is used to choose between open collector and push- pull outputs. The open- collector option is suitable when this device is used in applications such as LED interface, where high drive current is required. SOUT is the output that acknowledges reception of the serial data. To ensure the high- impedance state during power up or power down, OE should be tied to VCC1 through a pullup resistor; the minimum value of the resistor is determined by the current- sinking capability of the driver. In the open-collector mode (OUTSEL = L), the outputs are inverted, e.g., Y1 = 1 when D1 = H

Features

AI Translation
  • Single- Wire Serial Data Input
  • Compatible With UART Serial- Data Format
  • Up to Eight Devices (64- Bit Parallel) Can Share the Same Bus by Using Different Combinations of A0, A1, A2
  • Up to 40 mA Current Drive in Open- Collector Mode for Driving LEDs
  • Outputs Can be Configured as Open- Collector or Push- Pull
  • Internal Oscillator and Counter for Automatic Data- Rate Detection
  • Output Levels Are Referenced to VCC2 and Can Be Configured From 3 V to 12 V
  • Latch- Up Performance Exceeds 250 mA Per JESD 17
  • ESD Protection Exceeds JESD 22
    • 2000- V Human- Body Model (A114- A)
    • 1000- V Charged- Device Model (C101)