SILICON LABS MGM13S12F512GA-V3

The MGM13S is Silicon Labs’ first SiP module solution for 802.15.4 Mesh and multiprotocol networking that supports Bluetooth 5, including 2 Mbps, 1 Mbps and coded LE PHYs. Based on the EFR32MG13 Mighty Gecko SoC, the MGM13S delivers robust RF performance, low energy consumption, a wide selection of MCU peripherals, regulatory test certificates for various regions and countries, and a simplified development experience, all in a 6.5 mm×6.5 mm package. Together with the certified software stacks and powerful tools also offered by Silicon Labs, the MGM13S minimizes the area requirements, engineering efforts and development costs associated with adding Zigbee, Thread, Bluetooth 5, or multi-protocol connectivity to any product, accelerating its time-to-market.

• Zigbee, Thread, Bluetooth Low Energy, or multi-protocol connectivity
• Antenna or RF Pin variants
• Up to +19 dBm TX power
• -94.1 dBm Bluetooth Low Energy RX sensitivity at 1 Mbps
• -101.5 dBm 802.15.4 RX sensitivity
• 32-bit ARM Cortex-M4 core at 38.4 MHz
• 512/64 kB of flash/RAM memory
• Precision Low Frequency Oscillator meets Bluetooth Low Energy Sleep Clock accuracy requirements
• Robust security features
• Wide selection of MCU peripherals
• Integrated DC-DC converter
• 32 GPIO pins
• 6.5 mm×6.5 mm×1.4 mm
• Supported Protocols: Zigbee, Thread, Bluetooth 5, Multi-protocol
• 2.4 GHz radio
• High Performance 32-bit 38.4 MHz ARM Cortex-M4 with DSP instruction and floating-point unit for efficient signal processing
• Embedded Trace Macrocell (ETM) for advanced debugging
• Wake on Radio with signal strength detection, preamble pattern detection, frame detection and timeout
• Regulatory Certifications: FCC, CE, IC / ISEDC, MIC / Telec
• 1.8 V to 3.8 V single power supply
• -40 °C to +85 °C
• Support for Internet Security
• General Purpose CRC
• True Random Number Generator (TRNG)
• 2× Hardware Cryptographic Acceleration for AES 128/256, SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC
• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)
• 2× Analog Comparator (ACMP)
• 2× Digital to Analog Converter (VDAC)
• 3× Operational Amplifier (Opamp)
• Digital to Analog Current Converter (IDAC)
• Low-Energy Sensor Interface (LESENSE)
• Multi-channel Capacitive Sense Interface (CSEN)
• 32 pins connected to analog channels (APORT) shared between analog peripherals
• 32 General Purpose I/O pins with output state retention and asynchronous interrupts
• 8 Channel DMA Controller
• 12 Channel Peripheral Reflex System (PRS)
• 2×16-bit Timer/Counter, 3 or 4 Compare/Capture/PWM channels
• 1×32-bit Timer/Counter, 3 Compare/Capture/PWM channels
• Precision Low Frequency RC Oscillator (PLFRCO)
• 32-bit Real Time Counter and Calendar
• 16-bit Low Energy Timer for waveform generation
• 32-bit Ultra Low Energy Timer/Counter for periodic wake-up from any Energy Mode
• 16-bit Pulse Counter with asynchronous operation
• 2× Watchdog Timer
• 3× Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S)
• Low Energy UART (LEUART)
• 2×I2C interface with SMBus support and address recognition in EM3 Stop

• IoT multi-protocol end-node devices and gateways
• Connected home
• Lighting
• Health and wellness
• Metering
• Building automation and security