- Pinout
- Footprint
onsemi HCPL2630SDM
| Manufacturer | |
| MPN | HCPL2630SDM |
| LCSC Part # | C899520 |
| Packaging | SMD-8P |
| Customer # | |
| Key Attributes | 8-Pin DIP High-Speed 10 MBit/s Logic Gate Optocouplers |
| Datasheet |  onsemi HCPL2630SDM |
| Alternative Parts | 1 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | onsemi | |
| Packaging | SMD-8P | |
| Load Voltage | - | |
| Power Dissipation | - | |
| Output Current | 25mA | |
| Low Level Delay Time | 100ns | |
| High Level Delay Time | 100ns | |
| Features | Output enable control;Open-collector output | |
| Reverse Voltage | 5V | |
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.45V | |
| Voltage - Supply | 4.5V~5.5V | |
| Forward Current(If) | 30mA | |
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 10kV/us | |
| Number of Channels | 2 | |
| Input threshold current | 5mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | onsemi | |
| Packaging | SMD-8P | |
| Load Voltage | - | |
| Power Dissipation | - | |
| Output Current | 25mA | |
| Low Level Delay Time | 100ns | |
| High Level Delay Time | 100ns | |
| Features | Output enable control;Open-collector output | |
| Reverse Voltage | 5V |
| Type | Description | |
|---|---|---|
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.45V | |
| Voltage - Supply | 4.5V~5.5V | |
| Forward Current(If) | 30mA | |
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 10kV/us | |
| Number of Channels | 2 | |
| Input threshold current | 5mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
Introduction
The 6N137M, HCPL2601M, HCPL2611M single−channel and HCPL2630M, HCPL2631M dual−channel optocouplers consist of a 850 nm AlGaAs LED, optically coupled to a very high speed integrated photo−detector logic gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The switching parameters are guaranteed over the temperature range of -40℃ to +85℃. A maximum input signal of 5 mA will provide a minimum output sink current of 13 mA (fan out of 8). An internal noise shield provides superior common mode rejection of typically 10 kV/μs. The HCPL2601M and HCPL2631M has a minimum CMR of 5 kV/μs. The HCPL2611M has a minimum CMR of 10 kV/μs.
Features
- Very High Speed – 10 MBit/s
- Superior CMR - 10 kV/μs
- Fan−out of 8 Over -40°C to +85°C
- Logic Gate Output
- Strobable Output
- Wired OR−open Collector
- Safety and Regulatory Approvals
- UL1577, 5,000 VACRMS for 1 Minute
- DIN EN/IEC60747−5−5
- These are Pb−Free Devices
Applications
- Ground Loop Elimination
- LSTTL to TTL, LSTTL or 5 V CMOS
- Line Receiver, Data Transmission
- Data Multiplexing
- Switching Power Supplies
- Pulse Transformer Replacement
- Computer−peripheral Interface
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 1.8663 | $ 1.87 |
| 10+ | $ 1.5862 | $ 15.86 |
| 30+ | $ 1.412 | $ 42.36 |
| 100+ | $ 1.1563 | $ 115.63 |
| 500+ | $ 1.0749 | $ 537.45 |
| 1,000+ | $ 1.0407 | $ 1040.70 |
Standard Packaging1000/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | onsemi | |
| Packaging | SMD-8P | |
| Load Voltage | - | |
| Power Dissipation | - | |
| Output Current | 25mA | |
| Low Level Delay Time | 100ns | |
| High Level Delay Time | 100ns | |
| Features | Output enable control;Open-collector output | |
| Reverse Voltage | 5V | |
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.45V | |
| Voltage - Supply | 4.5V~5.5V | |
| Forward Current(If) | 30mA | |
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 10kV/us | |
| Number of Channels | 2 | |
| Input threshold current | 5mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
| Type | Description | |
|---|---|---|
| Category | Isolators/Optocouplers, Optoisolators/Logic Output Optoisolators | |
| Manufacturer | onsemi | |
| Packaging | SMD-8P | |
| Load Voltage | - | |
| Power Dissipation | - | |
| Output Current | 25mA | |
| Low Level Delay Time | 100ns | |
| High Level Delay Time | 100ns | |
| Features | Output enable control;Open-collector output | |
| Reverse Voltage | 5V |
| Type | Description | |
|---|---|---|
| Current transfer ratio | - | |
| Voltage - Forward(Vf) | 1.45V | |
| Voltage - Supply | 4.5V~5.5V | |
| Forward Current(If) | 30mA | |
| Operating Temperature | -40℃~+85℃ | |
| CMTI(kV/us) | 10kV/us | |
| Number of Channels | 2 | |
| Input threshold current | 5mA | |
| Isolation Voltage(Vrms) | 5kV | |
| Input Type | DC |
Introduction
The 6N137M, HCPL2601M, HCPL2611M single−channel and HCPL2630M, HCPL2631M dual−channel optocouplers consist of a 850 nm AlGaAs LED, optically coupled to a very high speed integrated photo−detector logic gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The switching parameters are guaranteed over the temperature range of -40℃ to +85℃. A maximum input signal of 5 mA will provide a minimum output sink current of 13 mA (fan out of 8). An internal noise shield provides superior common mode rejection of typically 10 kV/μs. The HCPL2601M and HCPL2631M has a minimum CMR of 5 kV/μs. The HCPL2611M has a minimum CMR of 10 kV/μs.
Features
- Very High Speed – 10 MBit/s
- Superior CMR - 10 kV/μs
- Fan−out of 8 Over -40°C to +85°C
- Logic Gate Output
- Strobable Output
- Wired OR−open Collector
- Safety and Regulatory Approvals
- UL1577, 5,000 VACRMS for 1 Minute
- DIN EN/IEC60747−5−5
- These are Pb−Free Devices
Applications
- Ground Loop Elimination
- LSTTL to TTL, LSTTL or 5 V CMOS
- Line Receiver, Data Transmission
- Data Multiplexing
- Switching Power Supplies
- Pulse Transformer Replacement
- Computer−peripheral Interface
C899520 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8541490000 |
| USHTS | 8541491010 |
| TARIC | 8541490000 |
| Type | Details |
|---|---|
| CAHTS | 8541490090 |
| BRHTS | 85414900 |
| INHTS | 85414900 |
| MXHTS | 8541.40.02 |
Alternative Parts
| MPN | Manufacturer | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|
| HT-2630-S1TA1 | HENGTUO | SMD-8P | 6 | $0.7427 $0.7817 |