LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
ADI LTC3890MPUH-2#TRPBF product image
Images for reference only

ADI LTC3890MPUH-2#TRPBF

Manufacturer
ADI
MPN
LTC3890MPUH-2#TRPBF
LCSC Part #
C686995
Packaging
QFN-32-EP(5x5)
Customer #
Key Attributes
2 Adjustable 800mV~24V Step-down type QFN-32-EP(5x5) DC DC Switching Controllers RoHS
Datasheetpdf iconADI LTC3890MPUH-2#TRPBF
RoHS Compliance1 documents available
Out of Stock
Notify Me
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 56.116$ 56.12
200+$ 21.7167$ 4343.34
500+$ 20.9542$ 10477.10
1,000+$ 20.576$ 20576.00
Standard Packaging2500/Full Reel
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers
ManufacturerADI
PackagingQFN-32-EP(5x5)
Operating Temperature-55℃~+150℃@(TJ)
Synchronous RectifierYes
Output Current-
FeaturesAdjustable current limiting;Adjustable soft-start;Output voltage tracking;Operating status indication;Frequency synchronization;Light load efficient mode;Built-in LDO regulator
Number of Channels2
TopologyBuck;SEPIC
Frequency - Switching835kHz;535kHz
Operating Voltage4V~60V
Output TypeAdjustable
Switch tube (built-in/external)-
Output Voltage800mV~24V
FunctionStep-down type
Quiescent Current50uA
Report an ErrorShow similar products (0) >

Introduction

AI Translation

The LTC3890-2 is a high performance dual step-down switching regulator DC/DC controller that drives all N-channel synchronous power MOSFET stages. A constant frequency current mode architecture allows a phaselockable frequency of up to 850kHz. Power loss and noise due to the ESR of the input capacitor are minimized by operating the two controller output stages out-of-phase. The 50μA no-load quiescent current extends operating run time in battery-powered systems. OPTI-P compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. A wide 4V to 60V input supply range encompasses a wide range of intermediate bus voltages and battery chemistries. Independent TRACK/SS pins for each controller ramp the output voltages during start-up. Current mode control limits the inductor current during short-circuit conditions. The PLLIN/MODE pin selects among Burst Mode operation, pulse-skipping mode, or continuous conduction mode at light loads.

Features

AI Translation
  • Wide VIN Range: 4V to 60V (65V Abs Max)
  • Low Operating IQ: 50µA (One Channel On)
  • Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 24V
  • RSENSE or DCR Current Sensing
  • Out-of-Phase Controllers Reduce Input Capacitance and Power Supply Induced Noise
  • Phase-Lockable Frequency (75kHz to 850kHz)
  • Programmable Fixed Frequency (50kHz to 900kHz)
  • Selectable Continuous, Pulse-Skipping or Low Ripple Burst Mode Operation at Light Loads
  • Selectable Current Limit
  • Very Low Dropout Operation: 99% Duty Cycle
  • Adjustable Output Voltage Soft-Start or Tracking
  • Power Good Output Voltage Monitors
  • Low Shutdown Iq < 14µA
  • Internal LDO Powers Gate Drive from VIN or EXTVCC
  • Small Low Profile (0.75mm) 5mm × 5mm QFN Package
  • AEC-Q100 Qualified for Automotive Applications

Applications

AI Translation
  • Automotive Always-On Systems
  • Battery Operated Digital Devices
  • Distributed DC Power Systems