MICROCHIP PIC16F1788-I/SS
| 제조업체 | |
| 제조사 품번 | PIC16F1788-I/SS |
| LCSC 번호 | C641714 |
| 포장 | SSOP-28-208mil |
| 고객 번호 | |
| 주요 제원 | 28-Pin 8-Bit Advanced Analog Flash Microcontroller |
| 데이터시트 |
제품 사양
전체
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| 제조업체 | MICROCHIP | |
| 포장 | SSOP-28-208mil | |
| DAC (Bit) | 8bit;5bit | |
| ADC (Bit) | 12bit | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 2.3V~5.5V | |
| EEPROM | 256Byte | |
| Program Storage Size | 28KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in | |
| Number of I/O | 24 |
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| 제조업체 | MICROCHIP | |
| 포장 | SSOP-28-208mil | |
| DAC (Bit) | 8bit;5bit | |
| ADC (Bit) | 12bit | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 2.3V~5.5V |
| 타입 | 설명 | |
|---|---|---|
| EEPROM | 256Byte | |
| Program Storage Size | 28KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in | |
| Number of I/O | 24 |
오류 신고유사 제품 보기 (0) >
주요 특징
AI 번역
- Only 49 Instructions
- Operating Speed: DC – 32 MHz clock input, DC – 125 ns instruction cycle
- Interrupt Capability with Automatic Context Saving
- 16-Level Deep Hardware Stack with optional Overflow/Underflow Reset
- Direct, Indirect and Relative Addressing modes
- Two full 16-bit File Select Registers (FSRs), FSRs can read program and data memory
- Up to 16 KW Flash Program Memory: Self-programmable under software control, Programmable code protection, Programmable write protection
- 256 Bytes of Data EEPROM
- Up to 2048 Bytes of RAM
- Four Programmable Switch Mode Controller (PSMC) modules: Digital and/or analog feedback control of PWM frequency and pulse begin/end times, 16-bit Period, Duty Cycle and Phase, 16 ns clock resolution, Supports Single PWM, Complementary, Push-Pull and 3-phase modes of operation, Dead-band control with 8-bit counter, Auto-shutdown and restart, Leading and falling edge blanking, Burst mode
- Sleep mode: 50 nA @1.8V, typical
- Watchdog Timer: 500 nA @1.8V, typical
- Timer1 Oscillator: 500 nA @32 kHz Operating Current: 8 μA @ 32 kHz, 1.8V, typical, 32 μA/MHz @1.8V, typical
- Analog-to-Digital Converter (ADC): Fully differential 12-bit converter, Up to 75 ksps conversion rate, 11 single-ended channels, 5 differential channels, Positive and negative reference selection
- One 8-Bit and Three 5-Bit Digital-to-Analog Converters (DAC): Output available externally, Positive and negative reference selection, Internal connections to comparators, op amps, Fixed Voltage Reference (FVR) and ADC
- Four High-Speed Comparators: 50 ns response time, Rail-to-rail inputs, Software selectable hysteresis, Internal connection to op amps, FVR and DAC
- Up to Three Operational Amplifiers: Rail-to-rail inputs/outputs, High/Low selectable Gain Bandwidth Product, Internal connection to DAC and FVR
- Fixed Voltage Reference (FVR): 1.024V, 2.048V and 4.096V output levels, Internal connection to ADC, comparators and DAC
- Up to 36 I/O Pins and 1 Input-only Pin
- High Current Sink/Source for LED Drivers
- Individually Programmable Interrupt-on-Change Pins
- Individually Programmable Weak Pull-Ups
- Individual Input Level Selection
- Individually Programmable Slew Rate Control
- Individually Programmable Open-Drain Outputs
- Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
- Enhanced Timer1: 16-bit timer/counter with prescaler, External Gate Input mode, Dedicated low-power 32 kHz oscillator driver
- Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
- Two Capture/Compare/PWM modules (CCP): 16-bit capture, maximum resolution 12.5 ns, 16-bit compare, max resolution 31.25 ns, 10-bit PWM, max frequency 32 kHz
- Master Synchronous Serial Port (SSP) with SPI and I2C with: 7-bit address masking, SMBus/PMBus compatibility
- Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART): RS-232, RS-485 and LIN compatible, Auto-baud detect, Auto-wake-up on start
- Operate up to 32 MHz from Precision Internal Oscillator: Factory calibrated to ±1%, typical, Software selectable frequency range from 32 MHz to 31 kHz
- 31 kHz Low-Power Internal Oscillator
- 32.768 kHz Timer1 Oscillator: Available as system clock, Low-power RTC
- External Oscillator Block with: 4 crystal/resonator modes up to 32 MHz using 4x PLL, 3 external clock modes up to 32 MHz
- 4x Phase-Locked Loop (PLL)
- Fail-Safe Clock Monitor: Detect and recover from external oscillator failure
- Two-Speed Start-up: Minimize latency between code execution and external oscillator start-up
- Power-Saving Sleep mode
- Power-on Reset (POR)
- Power-up Timer (PWRT)
- Oscillator Start-up Timer (OST)
- Brown-out Reset (BOR) with Selectable Trip Point
- Extended Watchdog Timer (WDT)
- In-Circuit Serial Programming (ICSP)
- In-Circuit Debug (ICD)
- Enhanced Low-Voltage Programming (LVP)
- Operating Voltage Range: 1.8V to 3.6V (PIC16LF1788/9), 2.3V to 5.5V (PIC16F1788/9)
재고 있음: 31
31 재고 있음, 당일 발송
최소값: 1배수: 1판매 단위: Piece
BOM 목록에 추가
| 수량 | 단가 | 총액 |
|---|---|---|
| 1+ | $ 5.6053 | $ 5.61 |
| 10+ | $ 4.8859 | $ 48.86 |
| 30+ | $ 4.4579 | $ 133.74 |
| 100+ | $ 4.0249 | $ 402.49 |
| 500+ | $ 3.8248 | $ 1912.40 |
| 1,000+ | $ 3.7352 | $ 3735.20 |
표준 패키지47/Full Tube | ||
수량이 많을수록 더 좋은 가격?
$
제품 사양
전체
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| 제조업체 | MICROCHIP | |
| 포장 | SSOP-28-208mil | |
| DAC (Bit) | 8bit;5bit | |
| ADC (Bit) | 12bit | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 2.3V~5.5V | |
| EEPROM | 256Byte | |
| Program Storage Size | 28KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in | |
| Number of I/O | 24 |
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| 제조업체 | MICROCHIP | |
| 포장 | SSOP-28-208mil | |
| DAC (Bit) | 8bit;5bit | |
| ADC (Bit) | 12bit | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 2.3V~5.5V |
| 타입 | 설명 | |
|---|---|---|
| EEPROM | 256Byte | |
| Program Storage Size | 28KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in | |
| Number of I/O | 24 |
오류 신고유사 제품 보기 (0) >
주요 특징
AI 번역
- Only 49 Instructions
- Operating Speed: DC – 32 MHz clock input, DC – 125 ns instruction cycle
- Interrupt Capability with Automatic Context Saving
- 16-Level Deep Hardware Stack with optional Overflow/Underflow Reset
- Direct, Indirect and Relative Addressing modes
- Two full 16-bit File Select Registers (FSRs), FSRs can read program and data memory
- Up to 16 KW Flash Program Memory: Self-programmable under software control, Programmable code protection, Programmable write protection
- 256 Bytes of Data EEPROM
- Up to 2048 Bytes of RAM
- Four Programmable Switch Mode Controller (PSMC) modules: Digital and/or analog feedback control of PWM frequency and pulse begin/end times, 16-bit Period, Duty Cycle and Phase, 16 ns clock resolution, Supports Single PWM, Complementary, Push-Pull and 3-phase modes of operation, Dead-band control with 8-bit counter, Auto-shutdown and restart, Leading and falling edge blanking, Burst mode
- Sleep mode: 50 nA @1.8V, typical
- Watchdog Timer: 500 nA @1.8V, typical
- Timer1 Oscillator: 500 nA @32 kHz Operating Current: 8 μA @ 32 kHz, 1.8V, typical, 32 μA/MHz @1.8V, typical
- Analog-to-Digital Converter (ADC): Fully differential 12-bit converter, Up to 75 ksps conversion rate, 11 single-ended channels, 5 differential channels, Positive and negative reference selection
- One 8-Bit and Three 5-Bit Digital-to-Analog Converters (DAC): Output available externally, Positive and negative reference selection, Internal connections to comparators, op amps, Fixed Voltage Reference (FVR) and ADC
- Four High-Speed Comparators: 50 ns response time, Rail-to-rail inputs, Software selectable hysteresis, Internal connection to op amps, FVR and DAC
- Up to Three Operational Amplifiers: Rail-to-rail inputs/outputs, High/Low selectable Gain Bandwidth Product, Internal connection to DAC and FVR
- Fixed Voltage Reference (FVR): 1.024V, 2.048V and 4.096V output levels, Internal connection to ADC, comparators and DAC
- Up to 36 I/O Pins and 1 Input-only Pin
- High Current Sink/Source for LED Drivers
- Individually Programmable Interrupt-on-Change Pins
- Individually Programmable Weak Pull-Ups
- Individual Input Level Selection
- Individually Programmable Slew Rate Control
- Individually Programmable Open-Drain Outputs
- Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
- Enhanced Timer1: 16-bit timer/counter with prescaler, External Gate Input mode, Dedicated low-power 32 kHz oscillator driver
- Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
- Two Capture/Compare/PWM modules (CCP): 16-bit capture, maximum resolution 12.5 ns, 16-bit compare, max resolution 31.25 ns, 10-bit PWM, max frequency 32 kHz
- Master Synchronous Serial Port (SSP) with SPI and I2C with: 7-bit address masking, SMBus/PMBus compatibility
- Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART): RS-232, RS-485 and LIN compatible, Auto-baud detect, Auto-wake-up on start
- Operate up to 32 MHz from Precision Internal Oscillator: Factory calibrated to ±1%, typical, Software selectable frequency range from 32 MHz to 31 kHz
- 31 kHz Low-Power Internal Oscillator
- 32.768 kHz Timer1 Oscillator: Available as system clock, Low-power RTC
- External Oscillator Block with: 4 crystal/resonator modes up to 32 MHz using 4x PLL, 3 external clock modes up to 32 MHz
- 4x Phase-Locked Loop (PLL)
- Fail-Safe Clock Monitor: Detect and recover from external oscillator failure
- Two-Speed Start-up: Minimize latency between code execution and external oscillator start-up
- Power-Saving Sleep mode
- Power-on Reset (POR)
- Power-up Timer (PWRT)
- Oscillator Start-up Timer (OST)
- Brown-out Reset (BOR) with Selectable Trip Point
- Extended Watchdog Timer (WDT)
- In-Circuit Serial Programming (ICSP)
- In-Circuit Debug (ICD)
- Enhanced Low-Voltage Programming (LVP)
- Operating Voltage Range: 1.8V to 3.6V (PIC16LF1788/9), 2.3V to 5.5V (PIC16F1788/9)
C641714 EasyEDA 라이브러리
컴플라이언스 & 수출 코드
| 타입 | 세부사항 |
|---|---|
| RoHS | |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| 타입 | 세부사항 |
|---|---|
| RoHS | |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| 타입 | 세부사항 |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |



