LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD
Carrinho
TE Connectivity OJE-SS-112HM,000 product image
Imagens ilustrativas

TE Connectivity OJE-SS-112HM,000

Fabricante
TE Connectivity
Cód. da peça
OJE-SS-112HM,000
Nº LCSC
C6134424
Emb.
Through Hole
Número do Cliente
Atrib. princ.
RELAY POWER SPST-NO 10A 12V
Folha de Dadospdf iconTE Connectivity OJE-SS-112HM,000
Em estoque: 5
5 Em estoque, envio imediato
Mínimo: 1Múltiplo: 1Unidade de venda: Piece
Adicionar à Lista BOM
Qtd.Preço unit.Valor total
1+$ 2.2568$ 2.26
10+$ 2.2079$ 22.08
30+$ 2.1752$ 65.26
100+$ 2.1426$ 214.26
Encapsulamento Padrão100/Full Bag
Melhor preço para maior quantidade?
$

Especificações do Produto

Tudo
TipoDescrição
CategoriaRelays/Power Relays, Over 2 Amps
FabricanteTE Connectivity
Emb.Through Hole
Coil Voltage12V
Switching Voltage(Max)277V@AC;30V@DC
Coil Resistance320Ω
Release Time4ms
Operate Time10ms
Length-
Height-
Number of Pins-
Contact Resistance100mΩ
Coil Type-
Width-
Operating Temperature-30℃~+70℃
Switching Current(Max)10A
Coil Rated Power450mW
Contact Rating10A@240VAC
Contact MaterialSilver
Contact Form1 Set Normally Open: 1A (SPST NO)
Reportar um erroMostrar produtos similares (0) >

Recursos

Tradução por IA
  • Contact Configuration: SPST (N.O)
  • Contact Material: Silver alloy
  • Applicable Standards: Conform with Japan Product Safety Electrical Appliance & Materials law; Recognized by UL, CSA
  • Rated Voltage: DC12V
  • Coil Resistance: 320Ω (±10%)
  • Rated Power Consumption: Approx. 0.45W
  • Allowable Voltage: 130% of rated voltage (at 23℃)
  • Contact Rating: AC240V Cosφ = 1 10A 10A 10A
  • Rated Carrying Current: 10A
  • Contact Allowable Power: 2500VA
  • Minimum Applicable Load: DC5V 100mA (reference value)
  • Contact Resistance: 100mΩ max. (initial value)
  • Must Operate Voltage: DC9.0V or below (at 23℃)
  • Must Release Voltage: DC0.6V or above (at 23℃)
  • Operate Time: 10ms max. at rated voltage
  • Release Time: 5ms max. at rated voltage
  • Durability:
    • Electrical: 100,000 operations min. at contact rating (A) (switching frequency: 10 ops/min)
    • Mechanical: 10,000,000 operations min. at no load (switching frequency: 300 ops/min)
  • Dielectric Strength (detection current 1mA):
    • Between same-polarity contacts: 750VAC for 1 min or 900VAC for 1 sec
    • Between coil and contacts: 3000VAC for 1 min or 3600VAC for 1 sec
  • Insulation Resistance: 1000MΩ min. between same-polarity contacts and between coil and contacts at 500VDC
  • Surge Withstand Voltage: 5kV (1.2/50μs) between coil and contacts
  • Temperature Rise:
    • Malfunction: No contact malfunction of 1ms or more when variable vibration of 1.5mm double amplitude at 10–55Hz is applied in 3 directions for 5 minutes each
    • Endurance: No abnormality in structure or characteristics after variable vibration of 1.5mm double amplitude at 10–55Hz is applied in 3 directions for 2 hours each
  • Standard Test Conditions:
    • Temperature: 23±5℃
    • Humidity: 60±10% RH
    • Measurement Condition: Standard orientation with terminals facing downward
  • Operating Conditions:
    • Temperature: -30 to 60℃ (no icing or condensation)
    • Humidity: 20 to 85% RH
    • Environment:
      • Free from corrosive gases such as hydrogen sulfide and salt spray
      • Free from visually detectable dust
      • Not exposed to direct sunlight