TI CDC421A312RGET

A high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz to 2.35 GHz frequency range. It has an integrated crystal oscillator that operates in conjunction with an external AT-cut crystal to produce a stable frequency reference for a phase-locked loop (PLL)-based frequency synthesizer. The output frequency (f₀ₜₒₚ) is proportional to the frequency of the input crystal (fXTAL). The device operates in 3.3-V supply environment and is characterized for operation from -40°C to +85°C. It is available in a QFN-24 4-mm × 4-mm package. It differs from the CDC421xxx in the following ways: Device Startup It has an improved startup circuit to enable correct operation for all power-supply ramp times.

• Single 3.3-V Supply High-Performance Clock Generator, Incorporating Crystal Oscillator Circuitry with Integrated Frequency Synthesizer
• Low Output Jitter: As low as 380 fs (RMS integrated between 10 kHz to 20 MHz)
• Low Phase Noise at 312.5 MHz: Less than –120 dBc/Hz at 10 kHz and –147 dBc/Hz at 10-MHz offset from carrier
• Supports Crystal or LVCMOS Input Frequencies at 31.25 MHz, 33.33 MHz, and 35.42 MHz
• Output Frequencies: 100 MHz, 106.25 MHz, 125 MHz, 156.25 MHz, 212.5 MHz, 250 MHz, and 312.5 MHz
• Differential Low-Voltage Positive Emitter Coupled Logic (LVPECL) Outputs
• Fully-Integrated Voltage-Controlled Oscillator (VCO): Runs from 1.75 GHz to 2.35 GHz
• Typical Power Consumption: 300 mW
• Chip Enable Control Pin
• Available in 4-mm × 4-mm QFN-24 Package
• ESD Protection Exceeds 2 kV (HBM)
• Industrial Temperature Range: -40°C to +85°C

• Low-Cost, Low-Jitter Frequency Multiplier