TI MSP430F5172IDAR

The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in less than 5 μs. The MSP430F51x2 microcontrollers include two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, a high-performance 10-bit ADC, an on-chip comparator, a 3-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins. The MSP430F51x1 microcontrollers include two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, an on-chip comparator, a 3-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins. Typical applications for these devices include analog and digital sensor systems, LED lighting, digital power supplies, motor controls, remote controls, thermostats, digital timers, and hand-held meters.

• Low Supply-Voltage Range: 3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
  • Active Mode (AM): 180 μA/MHz
  • Standby Mode (LPM3 WDT Mode, 3 V): 1.1 μA
  • Off Mode (LPM4 RAM Retention, 3 V): 0.9 μA
  • Shutdown Mode (LPM4.5, 3 V): 0.25 μA
• Wake up From Standby Mode in Less Than 5 μs
• 16-Bit RISC Architecture, Extended Memory, 40-ns Instruction Cycle Time
• Flexible Power-Management System
  • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
  • Supply Voltage Supervision, Monitoring, and Brownout
• Unified Clock System
  • FLL Control Loop for Frequency Stabilization
  • Low-Power Low-Frequency Internal Clock Source (VLO)
  • Low-Frequency Trimmed Internal Reference Source (REFO)
  • 32-kHz Crystals (XT1)
  • High-Frequency Crystals up to 25 MHz (XT1)
• Hardware Multiplier Supports 32-Bit Operations
• 3-Channel DMA
• Up to Twelve 5-V-Tolerant Digital Push/Pull I/Os With up to 20-mA Drive Strength
• 16-Bit Timer TD0 With Three Capture/Compare Registers and Support of High-Resolution Mode
• 16-Bit Timer TD1 With Three Capture/Compare Registers and Support of High-Resolution Mode
• 16-Bit Timer TA0 With Three Capture/Compare Registers
• Universal Serial Communication Interfaces (USCIs)
  • USCI_A0 Supports:
    • Enhanced UART Supports Automatic BaudRate Detection
    • IrDA Encoder and Decoder
    • Synchronous SPI
  • USCI_B0 Supports:
    • I2C
    • Synchronous SPI
• 10-Bit 200-ksps Analog-to-Digital Converter (ADC)
  • Internal Reference
  • Sample-and-Hold
  • Autoscan Feature
  • Up to 8 External Channels and 2 Internal Channels, Including Temperature Sensor
• Up to 16-Channel On-Chip Comparator Including an Ultra-Low-Power Mode
• Serial Onboard Programming, No External Programming Voltage Needed
• Available in 40-Pin QFN (RSB), 38-Pin TSSOP (DA), and 40-Pin Die-Sized BGA (YFF) Packages

• Analog and Digital Sensor Systems
• LED Lighting
• Digital Power Supplies
• Motor Controls
• Remote Controls
• Thermostats